![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
KSC Glock g26c
Hi my trusty KSC glock g26c can't finish a mag without blowign out all its gas, If I shoot like a few times, the slide doesn't go all the way back to normal, then it blows out all its gas en then the slide pops back to normal, I don't understand why... I have my gun wel lubed and , when I put my friends mag in my gun( he hasn't put a high flow valve in) my gun still does the same thing, this is really costing me precious gas. I really want to be able to use my gun normally ...
![]() |
|
![]() |
![]() |
![]() |
#2 |
Division
|
After the shot when the all the gas is released, and the slide pops back to normal, can you still pull the trigger and release the hammer?
__________________
![]() Weee! |
![]() |
![]() |
![]() |
#3 |
up, I have the same problem with the g26, when I first got it, there was some gas left in the mag, I emptied the mag shooting aournd fifteen rounds with no problem.
Now it seems that I can't get more than 1 or 2 shots out of one mag. I just lubed it. Could that be it? thanks
__________________
![]() |
|
![]() |
![]() |
![]() |
#4 |
* AV revoked *
|
You might want to check the mag catch, check out if you mag get into mag well without rattle, it it's rattle then just to push it and hold by hand and test fire, if it's fire well like then the problem is mag catch wore out. Just buy a metal guarder one and replace it. it's like 18 $ from airsofparts.ca
KND
__________________
![]() ![]() |
![]() |
![]() |
![]() |
#5 |
ok thx I'll test that.
edit: nope. it's not that.
__________________
![]() Last edited by Jimski; April 3rd, 2009 at 15:39.. |
|
![]() |
![]() |
![]() |
#6 |
why is it working when I got it and not anymore
![]() whyyyyyyyy
__________________
![]() |
|
![]() |
![]() |
![]() |
#7 |
You might need a new rocket valve.
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |