November 20th, 2012, 17:27 | #1 |
G&P....are they that good???
Hey guys.
I bought a G&P M4 from Toronto Airsoft and I have been really happy with it (knock on wood). However, I know two others who have had nothing but problems (from exploding gearboxes to barrels falling out). I've heard that G&P is the Ferrari of AEG's, and I have heard that they are just a high priced, brand name gun. I was thinking of picking up a new AEG (M14 DMR or AK) and I was wondering if I should spend the extra for G&P, or should I buy a different brand?? Did I just get lucky with my M4 and got a good one?? What is the general opinion on G&P? I'd like to hear what some Vet's have to say about them. (oh...and I have no intention of buying a $1700 Systema...before someone tells me to go that way :-)) Thanks |
|
November 20th, 2012, 17:37 | #2 | |
G&P is sexy on the outside but needs work on the inside.
usually just a shim of the gearbox, and a changing of the hop rubber. sometimes all the gears need to be replaced. also, although G&P would rank very high on my list of brands, its far from the Ferrari of AEGs more like a new ford mustang, nice on the outside, shite on the inside.
__________________
Quote:
|
||
November 20th, 2012, 17:38 | #3 |
I don't own a G&P but want one very badly, just because of how nice they look, Firepig, LMT, etc....But apparently their internals are pretty bad, mostly the gears.
__________________
Armoury: TM M4A1 ICS M4A1 JG M4A1 |
|
November 20th, 2012, 17:41 | #4 |
Inner barrel falling out is a new one to me.... Is the C-clip on the hop up secure (or is it even there)?
But I do agree with the exploding gears bit. Replace the gearset, shim, and grease it and you're good to go. Also locktite your motor height adjustment screw, sometimes it can loosen and shred your pinion/bevel. For the record I own a G&P that's been faithful to me and my go to primary for 4 years with no major overhauls needed, just a few worn out parts replaced here and there, a spring change (old one worn out and also was only an M100/M110 giving me 375-ish FPS, new spring brought me up to 396) and an inner barrel upgrade.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE Last edited by L473ncy; November 20th, 2012 at 17:43.. |
|
November 20th, 2012, 17:43 | #5 | |
Quote:
|
||
November 20th, 2012, 17:43 | #6 |
All good to know.
What are your preferred brands then? Am I better off saving the $$$ and going with something else? Thanks |
|
November 20th, 2012, 17:45 | #7 | |
Quote:
|
||
November 20th, 2012, 17:48 | #8 | |
Quote:
Essentially unless you are comparing a PTW all AEGs are the same they are based on Marui planetary gearbox set up. Granted that there are a few company that comes out with proprietory parts that mimicks a PTW set up ie. WE KATANA, ICS, DTW but they are not the same when compared to a PTW. PTW with it's high price tag do have it's own demons same as owning a AEGs so in the end it's a toy it will break no matter how good teh company is, hell I'm waiting for my FCC to go down but that damn thing keeps on ticking, and I still have my HK51 from Tokyo Marui since 91 and it's in perfect working condition, What I'm trying to say is no matter what the company is it's a toy, it will break the only thing you should be concern is how fast? and all that depend on how you use it and how you take care of it Last edited by wildcard; November 20th, 2012 at 18:02.. |
||
November 20th, 2012, 17:50 | #9 |
They are grear until you have to open them. I own 5 g&p guns and their gearboxes are VERY hit and miss.
|
|
November 20th, 2012, 17:50 | #10 | |
Quote:
Lately I've also seen some pretty dumb ass shit coming from nubs listening to some other idiots advice such as using a 11.1 20C LiPo on a stock KA or G&P claiming that it will give you awesome ROF, well guess what? in about 3 games that gearbox that is pushing close to 400fps fails. high fps and high ROF don't mix especially in a version 2 gearbox I don't care who has said they have seen it done or from what mystical format they mod it to, I've used High FPS and High ROF set up before most of teh players here have heard of airsoft, they would not last the most in extreme case would be 2 full day worth of games. So do yourself a favor if you are a mag tickler get yourself a LMG with a V3 box set up if not prepare to spend some $$ Last edited by wildcard; November 20th, 2012 at 18:10.. |
||
November 20th, 2012, 18:01 | #11 |
aka coachster
|
Keep an eye on G&P pistons. I find them to be a little brittle. Also I've had issue with the spur gear and sector gear where a tooth would break off and jam up the mechbox. If you were lucky, it'd fall away and get stuck elsewhere in the box and run just fine. No luck for me.
Here's a picture of the shattering piston. Only way I could get it to show on camera was with unique lighting. |
November 20th, 2012, 18:11 | #12 |
I have owned a G&P Stoner for about 2 years now, and have not a single complaint. I have put bag after bag of bb's through it, and haven't pampered it at all. It still runs like the day I took it out of the box, Perfectly! No jams, no missfeeds, not even hop up issues. I haven't done a single mod to it, or even opened it up. It certainly runs like a ferrari, very fast! It's my only experience with G&P, but I will buy G&P again for sure. Just my 2 cents......
__________________
A.K.A. BUDHA ________________ Today's post is brought to you by the letter F Level 2 sniper certified / night operator |
|
November 20th, 2012, 18:59 | #13 |
I hope I'm not bursting anyone's bubble, but I found most of not all the "New" G&P guns in north America to be all shit. Yes the externals are still nice, but the gearbox is just a POS. Almost all the G&P guns that has came across my bench in the last year has all the same issues. Bad gears, QC issues, upper and lower receivers not fitting into each other, and the list goes on. Ones that have came across the pond seems to be much better. This is just my experience and what I've seen lately. If you're gonna get a new G&P gun, make sure it's not from the US. It seems that's where the POS are coming from. Any other gundocs notice this?
__________________
Please email me as I'm not on ASC too often. Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
November 20th, 2012, 19:05 | #14 |
In a word, no. That gearset has no magical aspects to it aside from being very expensive. If you are spending $100 on gears, the only gears you should be buying is SiegeTek. If you want to spend $50 or less, buy Lonex / SHS / etc.
__________________
"Mah check" Now you know |
|
November 20th, 2012, 19:10 | #15 | |
Tys
|
Quote:
The cheaper "sportline" builds are so-so at best...same goes for other brands. Other builds...such as the Stoner...are phenomenal though. I'm pretty picky and selective now though. I've settled on what I want/trust/go-to. There's only a handful of electrics (not heavily custom made/modded) I'd go with...PTW, Realsword AK, G&P Stoner, KA Galil, G&G AK, KA FAL. Not many at the end of the day... |
|
|
Bookmarks |
|
|