14mm- AK-74 Flash Hider Attachment

[disasterarea]

I recently bought an AK-74-style flash hider for my Kraken. It's a two-piece model with an internal step down and adapter. Problem is, I can't get it to attach properly. It always winds up upside-fucking-down whatever I try. Any ideas outside of just gluing it all together?

[Styrak]

Use a rubber o-ring at the end of the threads closest to the stock end of the gun. Screw it on and it should stay in place in any position when it's tightened almost all the way.

[disasterarea]

Originally Posted by Styrak

Use a rubber o-ring at the end of the threads closest to the stock end of the gun. Screw it on and it should stay in place in any position when it's tightened almost all the way.

You mean on the muzzle, the adapter or inside the brake itself?

[Styrak]

On/behind the threads. I thought I was pretty clear...

[disasterarea]

Originally Posted by Styrak

On/behind the threads. I thought I was pretty clear...

There's three sets of threads on the whole mess. One on the muzzle/front sight base of the gun, one size adapter that screws into the flash hider, and the ones in the flash hider itself. Right pain in the ass trying to describe. You mean on the gun, don't you?

[Styrak]

On the gun.