do you know Short Rifle Stock System?

[Jimski]

it's RS:

http://www.shortrifles.com/

[ShelledPants]

Yeah I read about this a couple of weeks ago, bullpup m14 kit. Pretty slick.

[Shooting Addict]

Looks like a Famas

[m102404]

muzzle blast must be insane on that

[Brian McIlmoyle]

too bad it's prohibited in Canada....

[Blackthorne]

Everything kewl is prohibited in Canada, unless you make parts for the US government

[Brian McIlmoyle]

Originally Posted by Blackthorne

Everything kewl is prohibited in Canada, unless you make parts for the US government

Quiet you! gerrr

[m102404]

Ok, this is a airsoft blow back or real steel question...so drifting a bit off topic.

So if you're right handed (i.e. a normal person) and turning left corners...then bullpups and the like are good to go.

But what about left handed freaks, or if you need to shoot weak side, or pie a right hand corner with a bullpup rifle?

And I don't mean the ones where you can partially disassemble it and switch it to eject on the other side...I mean when it's setup and you want to switch right away....or for rifles that cannot be switched around. I mean...the Brits must have some left handed shooters (dunno if the L85 can be switched around).

[RacingManiac]

Doesn't guns like F2000 does "front" ejecting of casing?

[Danke]

Originally Posted by m102404

Ok, this is a airsoft blow back or real steel question...so drifting a bit off topic.

So if you're right handed (i.e. a normal person) and turning left corners...then bullpups and the like are good to go.

But what about left handed freaks, or if you need to shoot weak side, or pie a right hand corner with a bullpup rifle?

And I don't mean the ones where you can partially disassemble it and switch it to eject on the other side...I mean when it's setup and you want to switch right away....or for rifles that cannot be switched around. I mean...the Brits must have some left handed shooters (dunno if the L85 can be switched around).

In some cases you're just screwed (L85 for example) it's a case of an engineer drawing a pretty picture and forgetting someone might have to actually use it.

[Brian McIlmoyle]

Originally Posted by RacingManiac

Doesn't guns like F2000 does "front" ejecting of casing?

yeah but it is really the only one that does that... P90 ejects down

and I'm not sure I like the front eject thing.... consider firing from cover.. and every time you do a bright shiny brass tumbles out the front of the gun... I donno... maybe it's nothing... it just makes me go hmmm

[R.I.T.Z]

Originally Posted by RacingManiac

Doesn't guns like F2000 does "front" ejecting of casing?

yes it does the the front right.

as for that m14.
theres a thread somewhere on here about it
its called the m14 bulldog system
link here

[Jimski]

Originally Posted by m102404

But what about left handed freaks, or if you need to shoot weak side, or pie a right hand corner with a bullpup rifle?

well I guess you could mount something that catches used shells


(I think there are some that are bags instead of big cases)

but it's pretty dumb.

[Shooting Addict]

Originally Posted by Jimski

well I guess you could mount something that catches used shells


(I think there are some that are bags instead of big cases)

but it's pretty dumb.

It's usually a bag not a box

[ShelledPants]

Front ejecting (and in a somewhat similar light... down ejecting) is the worst idea possible.

When firing and moving forward, you are literally stepping on your brass... In the sand, no problem, indoors: Massive problem.

Originally Posted by Jimski

well I guess you could mount something that catches used shells


(I think there are some that are bags instead of big cases)

but it's pretty dumb.

Clearing a stovepipe from that must be a motherfucker.