hi capa 5.1 problem

AXe Hound · May 12th, 2008, 12:46

hi

well i got board and decided to try and take my hi capa apart and then i put it back together but to my demise i cant figure out how to do it mainly the pistol grip with all the little metal things and the frame and what not --hears a pic
so if any body can shine some lite on my problem that would be grate
thanks

ILLusion · May 12th, 2008, 13:01

1. Remove the main spring housing
2. Take the leaf spring out
3. Reinstall your mid-frame
4. Install beavertail safety, safety lever, etc
5. Install leaf spring - make sure all prongs push TOWARDS the muzzle. Nothing should be on "top" of the prongs.
6. Reattach main spring housing

AXe Hound · May 12th, 2008, 13:03

i had a feeling you would post to help me :P

THANKS

arman · May 12th, 2008, 16:05

have fun i tried bout 15times to get the back saftey to work...i finally got it on the 16th time...

Endymion · May 12th, 2008, 16:23

If you take the main spring housing off along with the leaf spring before mating the frame and grip, it's actually a very simple procedure to put it back together correctly. The leaf spring naturally sits on top of the parts it should sit on top of when you put it back in *after* grip and frame have been assembled.

seabass · June 10th, 2008, 00:37

I did the same thing but I'm still having a bit of troubles. My hammer just stays forward, One of the tiimes I put it together It would lock back every now and then, and I would have a really heavy trigger pull.

safx · June 10th, 2008, 08:20

Here's a simple explanation—

1. The disconnector goes behind the sear
2. The trigger loop has to be behind those
parts when you slap on the grip.
3. The leaf spring just sits on top of those
parts, like a layer cake.
4. Install the left side grip safety to hold
the beavertail in place while you work.

One of the things I thought as a new gun
owner is that the leaf spring fingers needed
to go over/under in some kind of way. Nope,
just lay it flat on.

seabass · June 10th, 2008, 12:52

Shit, I cant seem to get it to work still, THe hammer just snaps forward, no matter what i do it wont stay back. Does anyone have pics? I've been googling this like crazy and I cant find a damn thing, Any help would be great

RacingManiac · June 10th, 2008, 13:42

try this out:
http://www.arniesairsoft.co.uk/forum...=post&id=34184

seabass · June 10th, 2008, 22:32

I created an account on arnies, and looked it through, I just took the grip from the lower frame, But it looks as if though I have to take it apart even further to get it back together?

Naglfar · June 10th, 2008, 22:46

Quote:

Originally Posted by trevorthetwigyalienman

I created an account on arnies, and looked it through, I just took the grip from the lower frame, But it looks as if though I have to take it apart even further to get it back together?

Just pull the spring housing off, lay the 3-leaf spring in, grip safety and reattach the housing.

seabass · June 11th, 2008, 00:06

FIXED! those pics on arnies helped me out a lot. Thanks guys

m102404 · June 11th, 2008, 08:55

Quote:

Originally Posted by RacingManiac

try this out:
http://www.arniesairsoft.co.uk/forum...=post&id=34184

THANK YOU!!! for this link. I found it a while ago and then couldn't find it again...so frustrating.

Worked like a charm last night and it was comforting to have pics as a reference.

Tys

safx · June 11th, 2008, 10:40

Quote:

Originally Posted by m102404

THANK YOU!!! for this link. I found it a while ago and then couldn't find it again...so frustrating.

Worked like a charm last night and it was comforting to have pics as a reference.

Tys

LOL Tyson... shame. I'm right down
the road buddy

m102404 · June 11th, 2008, 10:49

Thanks bud, but I didn't want to bug you...

+ I hadn't actually taken it apart yet, so it wasn't broke, LOL. I just didn't want to start until I had a good reference to go on.

On one of my 5.1's I polished the sear and shortened/polished the main notch on the hammer. The trigger pull is very smooth now. I had to "bend"/strengthen the right most finger of the spring (the one that pushes the little silver wedge up under the sear) as it was sort of sticking after the first reassembly, but the downside is that the trigger pull is a bit heavier (compared by feel to the other stock 5.1). I'll fiddle with it some more.

Q. When eliminating trigger overtravel, does the back of the trigger "bottom" out on the body of the mag release? or some other part?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 12th, 2008, 12:46	#1
AXe Hound Trader rating Join Date: Sep 2007 Location: Winnipeg Manitoba	hi capa 5.1 problem hi well i got board and decided to try and take my hi capa apart and then i put it back together but to my demise i cant figure out how to do it mainly the pistol grip with all the little metal things and the frame and what not --hears a pic so if any body can shine some lite on my problem that would be grate thanks

May 12th, 2008, 13:01	#2
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	1. Remove the main spring housing 2. Take the leaf spring out 3. Reinstall your mid-frame 4. Install beavertail safety, safety lever, etc 5. Install leaf spring - make sure all prongs push TOWARDS the muzzle. Nothing should be on "top" of the prongs. 6. Reattach main spring housing __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

May 12th, 2008, 16:05	#4
arman Trader rating Join Date: Nov 2006 Location: Windsor, Ont.	have fun i tried bout 15times to get the back saftey to work...i finally got it on the 16th time... __________________ playing with my kid!

May 12th, 2008, 13:03	#3
AXe Hound Trader rating Join Date: Sep 2007 Location: Winnipeg Manitoba	i had a feeling you would post to help me :P THANKS

May 12th, 2008, 16:23	#5
Endymion Trader rating Join Date: Jun 2006 Location: Markham, ON	If you take the main spring housing off along with the leaf spring before mating the frame and grip, it's actually a very simple procedure to put it back together correctly. The leaf spring naturally sits on top of the parts it should sit on top of when you put it back in after grip and frame have been assembled.

June 10th, 2008, 00:37	#6
seabass trevorthetwigyalienman Trader rating Join Date: Nov 2005 Location: Prince edward island	I did the same thing but I'm still having a bit of troubles. My hammer just stays forward, One of the tiimes I put it together It would lock back every now and then, and I would have a really heavy trigger pull. __________________ Age Verifier for PEI (out of town) ...talk to phil, PM for details

June 10th, 2008, 08:20	#7
safx Trader rating Join Date: Nov 2005 Location: Toronto, St. Clair West	Here's a simple explanation— 1. The disconnector goes behind the sear 2. The trigger loop has to be behind those parts when you slap on the grip. 3. The leaf spring just sits on top of those parts, like a layer cake. 4. Install the left side grip safety to hold the beavertail in place while you work. One of the things I thought as a new gun owner is that the leaf spring fingers needed to go over/under in some kind of way. Nope, just lay it flat on. Last edited by safx; June 10th, 2008 at 13:20.. Reason: typo

June 10th, 2008, 12:52	#8
seabass trevorthetwigyalienman Trader rating Join Date: Nov 2005 Location: Prince edward island	Shit, I cant seem to get it to work still, THe hammer just snaps forward, no matter what i do it wont stay back. Does anyone have pics? I've been googling this like crazy and I cant find a damn thing, Any help would be great __________________ Age Verifier for PEI (out of town) ...talk to phil, PM for details

June 10th, 2008, 13:42	#9
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	try this out: http://www.arniesairsoft.co.uk/forum...=post&id=34184 __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

June 10th, 2008, 22:32	#10
seabass trevorthetwigyalienman Trader rating Join Date: Nov 2005 Location: Prince edward island	I created an account on arnies, and looked it through, I just took the grip from the lower frame, But it looks as if though I have to take it apart even further to get it back together? __________________ Age Verifier for PEI (out of town) ...talk to phil, PM for details

June 11th, 2008, 00:06	#12
seabass trevorthetwigyalienman Trader rating Join Date: Nov 2005 Location: Prince edward island	FIXED! those pics on arnies helped me out a lot. Thanks guys __________________ Age Verifier for PEI (out of town) ...talk to phil, PM for details

June 11th, 2008, 10:49	#15
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	Thanks bud, but I didn't want to bug you... + I hadn't actually taken it apart yet, so it wasn't broke, LOL. I just didn't want to start until I had a good reference to go on. On one of my 5.1's I polished the sear and shortened/polished the main notch on the hammer. The trigger pull is very smooth now. I had to "bend"/strengthen the right most finger of the spring (the one that pushes the little silver wedge up under the sear) as it was sort of sticking after the first reassembly, but the downside is that the trigger pull is a bit heavier (compared by feel to the other stock 5.1). I'll fiddle with it some more. Q. When eliminating trigger overtravel, does the back of the trigger "bottom" out on the body of the mag release? or some other part?

hi capa 5.1 problem

Doctor's Corner