My Glock 19

gamz · February 14th, 2007, 11:34

Not a fan of Glocks, but nice and to the point without too many gaudy gadgets.

Nice.

Erik2 · February 14th, 2007, 14:10

Quote:

Originally Posted by CDN_Stalker

Not a G&G then.

Does the gun return to battery fine without the mag in? Am thinking it's a mag issue (feed lips too stiff or something). I've used the stock recoil spring in my G19 before and it cycles fine, just not as crisp as the enhanced one.

It does it with both mag in and mag out.

If I put the slide lock on, and then press it the slide moves very slowly into battery and occasionally stops completely. That is with both mag in and mag out.

CDN_Stalker · February 14th, 2007, 14:35

Odd. Guess you'll have to get someone to look at it in depth.

Try taking the recoil spring/guide out, and with no mag, move the slide by hand and try to locate whereabouts it feels like it's jamming.

Erik2 · February 14th, 2007, 15:11

Okay I took the recoil spring out and moved the slide manually, it seems to stick right about here with the mag out:

For some reason when I took the spring out for the second time and tried to take better pictures, I could not get the slide to go on properly. So this picture is taken with the spring still in, but in the exact spot that it is sticking. It sticks with both the spring in and out.

I also took pictures of the spring and the mag. Maybe you guys can see something I cant.

Is there anybody in the Guelph area that wants to make a few bucks and take a look at this for me? I pay with money or beer

I also want to refinish the slide, but I don't want to lose the markings. So I guess i'll stick with the scratched up finish.

WhatTheWho · February 15th, 2007, 19:00

I'm assuming that the recoil is positioned correctly as it looks parallel with the frame of the Glock.

Check to see if your hammer is not hindering the slide returning to battery. Sometimes the hammer sear wears down, which causes the hammer to stick up above the hammer assembly, and it causes unnecessary friction with the chamber block under the slide.

Ibby · February 15th, 2007, 19:08

Quote:

Originally Posted by Erik2

I also want to refinish the slide, but I don't want to lose the markings. So I guess i'll stick with the scratched up finish.

Rub a crayon over the trades. Prep. Paint. Rub the crayon out. Voila!

CDN_Stalker · February 15th, 2007, 19:48

Man, that IS beaten up bad!

Unfortunately these pics don't even say 10 words. You are right in going after a gunsmith to check it out. If you are willing, you can mail it to me (I have lots of references) in Ottawa, I'll do what I can with it, handwork everything I can, let you know what needs replacing. I have some parts leftover from my 'parts G19' so I might be able to cannabalize some stuff to save you from ordering overseas.

Erik2 · February 21st, 2007, 13:26

I have somebody looking at it right now so I will wait and see whats going on with it.

Yeah it is beaten up really bad. But meh, I can't complain because of how dirty dirty cheap it was.

Renegade) · February 21st, 2007, 15:12

Cant go wrong with having Stalker look at it. Hes helped me with several GBB problems over the net, imagine what he could do with it in person.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 14th, 2007, 11:34	#16
gamz Trader rating Join Date: Apr 2004 Location: Ottawa, ON \| St. John's, NL	Not a fan of Glocks, but nice and to the point without too many gaudy gadgets. Nice. __________________ Grenadier Weapons SRC Colt M4A1 FMU + CA Military M203 Long \| TM G3 SAS \| TM G3A3 \| KJW Beretta M9 FMU _______________________________ Ottawa Valley Airsoft

February 14th, 2007, 14:35	#18
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Odd. Guess you'll have to get someone to look at it in depth. Try taking the recoil spring/guide out, and with no mag, move the slide by hand and try to locate whereabouts it feels like it's jamming. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

February 14th, 2007, 15:11	#19
Erik2 Trader rating Join Date: Nov 2005 Location: Ontario	Okay I took the recoil spring out and moved the slide manually, it seems to stick right about here with the mag out: For some reason when I took the spring out for the second time and tried to take better pictures, I could not get the slide to go on properly. So this picture is taken with the spring still in, but in the exact spot that it is sticking. It sticks with both the spring in and out. I also took pictures of the spring and the mag. Maybe you guys can see something I cant. Is there anybody in the Guelph area that wants to make a few bucks and take a look at this for me? I pay with money or beer I also want to refinish the slide, but I don't want to lose the markings. So I guess i'll stick with the scratched up finish. Last edited by Erik2; February 14th, 2007 at 15:26.. Reason: updated pictures

February 15th, 2007, 19:00	#20
WhatTheWho Trader rating Join Date: Dec 2002 Location: Edmonton, AB	I'm assuming that the recoil is positioned correctly as it looks parallel with the frame of the Glock. Check to see if your hammer is not hindering the slide returning to battery. Sometimes the hammer sear wears down, which causes the hammer to stick up above the hammer assembly, and it causes unnecessary friction with the chamber block under the slide. __________________ "The greatest pleasure in life is doing what people say you cannot do."

February 15th, 2007, 19:48	#22
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Man, that IS beaten up bad! Unfortunately these pics don't even say 10 words. You are right in going after a gunsmith to check it out. If you are willing, you can mail it to me (I have lots of references) in Ottawa, I'll do what I can with it, handwork everything I can, let you know what needs replacing. I have some parts leftover from my 'parts G19' so I might be able to cannabalize some stuff to save you from ordering overseas. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

February 21st, 2007, 13:26	#23
Erik2 Trader rating Join Date: Nov 2005 Location: Ontario	I have somebody looking at it right now so I will wait and see whats going on with it. Yeah it is beaten up really bad. But meh, I can't complain because of how dirty dirty cheap it was.

February 21st, 2007, 15:12	#24
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Cant go wrong with having Stalker look at it. Hes helped me with several GBB problems over the net, imagine what he could do with it in person. __________________ W1-5

My Glock 19

Airsoft Media