![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
ICS Selector Switch
Hey Guys,
Any1 that has an idea how 2 make the selector switch more ridgid? Cause it flips very easy 2 an other shooting mode. (sorry i don't have age verification but i'm from the Netherlands so) Thx Fubar |
|
![]() |
![]() |
![]() |
#2 |
What gun do you have? That would help on determining how to fix it.
__________________
Please email me as I'm not on ASC too often. ![]() Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
![]() |
![]() |
![]() |
#3 |
Hey
Hehe Sorry that would be usefull perhaps. I got a basic M4 model with a slide stock. Fubar. |
|
![]() |
![]() |
![]() |
#4 |
take out the MB and pop off the cap on the opposite side of the switch. stick in a screw driver and turn til it's tight. Don't torque it too much that it breaks or it's hard to turn the switch. That's all. I would first take it all apart to see how the bearing and spring is. Make sure the little indents on the receiver is clean and free of dirt. Good luck
__________________
Please email me as I'm not on ASC too often. ![]() Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
![]() |
![]() |
![]() |
#5 |
Hey,
Thx HkGhost. But everything inside the gearbox is taken apart alrdy and i had 2 lower the FPS so i only have an M90 spring it etc 2 get it to shoot 350-360 FPS (that's the limit here). So i tried that alrdy. I was thinking if it was an option 2 but a larger spring inside the selector switch? Fubar |
|
![]() |
![]() |
![]() |
#6 |
If there is a spring already inside the selector switch, just continue to use it. Give it a lil stretch (very little) before reinstalling it. That would give you a better "click" sound.
__________________
Please email me as I'm not on ASC too often. ![]() Custom Build | Upgrades | Repairs | Maintenance Contact: ghostgunwork@gmail.com / Private Message |
|
![]() |
![]() |
![]() |
#7 |
a.k.a. flamethis
|
Sounds exactly like what mine was doing. Check out the tutorial I posted. It might help.
I also stretched my spring a little like HKGhost said. |
![]() |
![]() |
![]() |
#8 |
Ok thx guys i'll have a go @ that.
|
|
![]() |
![]() |
![]() |
#9 |
I had the same problem. I took a belt hole puncher and punched a piece of leather from a belt and dropped the piece inside the selector switch under the spring so that the spring sits higher. Put the ball on top and put it back together. Now my selector switch is much more rigid and doesn't move out of place anymore.
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |