|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
July 10th, 2018, 22:01 | #1 |
Motor VS Battery
I recently made a huge mistake,I paired a Tienely 45k,13:1 gears and a 11.1 Lipo 20C.After a piece of humble pie I was told to drop the RPM,S to 25k. I put in 30K and it worked perfect (it has recently fractured the gearbox,shreaded the piston and so on).I just purchased a Ares vz58L and want to change the stock motor for a higher torque motor.
I was wandering if I put in a Lonex A2 Torque motor with 18:1 gears and a M130 spring can I still use my 11.1 Lipo with 20C? Thx in advance |
|
July 11th, 2018, 03:15 | #2 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Use a 22k or 30k motor.
20c 1200mah is not much amperage. If you have a mosfet throwing low voltage alarms while the battery is.over 10.5v, its because you dont have a high enough c rating. |
July 11th, 2018, 12:35 | #3 |
Thank you for the advice.
|
|
|
Bookmarks |
Thread Tools | |
|
|