which cylinder for a G&P?

Animalmother · January 1st, 2014, 09:33

What cylinder for a 300mm barrel and a corrected aoe sorbo of 3/16?
I am afraid of over/under voluming.
I have the stock tapered barrel and this: http://www.evike.com/product_info.php?products_i=38479/
The stock cylinder might not have enough volume because the aoe is corrected 3/16.

Wrath144 · January 1st, 2014, 20:05

Why are you afraid of over/under voluming? That just means you won't be getting the best FPS your spring could output. You shouldn't be worried about breaking your G&P shell unless you are attempting an extreme build.

Stealth · January 1st, 2014, 20:30

Typically a Type-1 cylinder (M4 hole) is used in that situation and general 350-400fps range.

ThunderCactus · January 1st, 2014, 20:33

promtheus type C for 300-400mm barrel, which is probably M4

firstly, who knows what barrel they're using to determine this, a 6.08 needs more volume than a 6.03
second, always be on the high side. So if you have a 300mm barrel, you want a cylinder for a 300-360mm barrel instead of a 250-310mm barrel or whatever
third, those stock barrels are terrible lol

Animalmother · January 2nd, 2014, 01:59

Ok guys thanks for your help I think I'm paranoid I forum surf too much.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 1st, 2014, 09:33	#1
Animalmother Trader rating Join Date: Sep 2008	which cylinder for a G&P? What cylinder for a 300mm barrel and a corrected aoe sorbo of 3/16? I am afraid of over/under voluming. I have the stock tapered barrel and this: http://www.evike.com/product_info.php?products_i=38479/ The stock cylinder might not have enough volume because the aoe is corrected 3/16.

January 1st, 2014, 20:05	#2
Wrath144 formerly steyr Trader rating Join Date: Sep 2005 Location: Winnipeg, Manitoba	Why are you afraid of over/under voluming? That just means you won't be getting the best FPS your spring could output. You shouldn't be worried about breaking your G&P shell unless you are attempting an extreme build. __________________ BROFORCE Admin - Winnipeg Airsoft

January 1st, 2014, 20:30	#3
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Typically a Type-1 cylinder (M4 hole) is used in that situation and general 350-400fps range.

January 1st, 2014, 20:33	#4
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	promtheus type C for 300-400mm barrel, which is probably M4 firstly, who knows what barrel they're using to determine this, a 6.08 needs more volume than a 6.03 second, always be on the high side. So if you have a 300mm barrel, you want a cylinder for a 300-360mm barrel instead of a 250-310mm barrel or whatever third, those stock barrels are terrible lol

January 2nd, 2014, 01:59	#5
Animalmother Trader rating Join Date: Sep 2008	Ok guys thanks for your help I think I'm paranoid I forum surf too much.

which cylinder for a G&P?

Upgrades & Modifications