Gate PicoSSR - The MOSFET that'll blow your mind

Stealth · February 3rd, 2013, 21:53

Well, it blew my mind anyway.

There's a FET somewhere in this picture:

Oh, there it is. Boner jams.

I did a more risky install and soldered it directly to the Deans connector MERF 3.2 style rather than having some lengths of wiring between the FET and plug. Hopefully it holds up, I added some bonus solder to the top of the negative plug. Sloppy-ass work. LOL

Performance Report:
Just wrapped it up and here's what it looks like at the end of the buffer tube. It's very inconspicuous and is holding up fantastic.

The finished product (was going for a John Noveske N4 Desert Crusader Tribute thing. Turned out to be a cute little SBR instead)

Did a quick round of testing. Specs of gearbox:
Modify SMOOTH Modular Nano-Torque gearset (which BTW are not smooth at all and sound like crap. And you can't shim them. Don't get these gears.)
X High Tech ultra high torque Neo motor
Turnigy Nanotech 11.1v 1400mah 25-50C lipo
400fps spring (found it in my parts bin)

Verdict:
It holds up very well to a mild build - relatively high discharge battery and neo motor.
Under sustained semi-auto fire (3 rounds per second for 30 seconds) the FET does get a bit warm, similar to the GDS-4005.
I'm going to put in an M150 spring soon...

phloudernow · February 3rd, 2013, 22:04

What are the features on it? is it up on your website yet? thinking of putting one in my LCT AK

Edit: Nvm found it on your website

THIS IS AWESOME

K3vX · February 3rd, 2013, 22:08

Nice idea to install it. Damn that mosfet is small.
I ordered the AB one, and will probably post pictures when I install it.

horto · February 3rd, 2013, 22:57

Wow.

JLiang · February 4th, 2013, 01:05

Brb retrieving wallet

nstahl.19 · February 4th, 2013, 01:26

Nice, much smaller then the smallest one I was considering. How stable is soldering it directly on the connector, looks good.

Stealth · February 4th, 2013, 14:03

Quote:

Originally Posted by nstahl.19

Nice, much smaller then the smallest one I was considering. How stable is soldering it directly on the connector, looks good.

Holding up fine so far - I think it'll be fine if force is applied along the FET's long axis. Still I wouldn't start yanking on it or anything.

Neat feature - they give you 3 pieces of heatshrink with glue-lined interiors so when you heat up the heatshrink, the glue will melt and form a protective waterproof barrier on the FET.

M.Garcia · February 4th, 2013, 14:32

Quick question. Is it recommended a MOSFET is used for all AEGs? Or only ones with certain requirements?

PrIeSt · February 4th, 2013, 15:19

Never hurt to have one on all guns.

That's tiny. With some fancy work you could put that little guy right inside the gear box I'd bet!

lurkingknight · February 4th, 2013, 16:22

if there is room, shrink wrap each wire, and then get the bigass shrinkwrap and wrap the entire deans end and both wires... this makes it a lot more stable cause now you're bracing the entire length of the wrap against 2 wires.. the tradeoff is space.. you won't be able to bend that segment that's essentially triple wrapped.

Desmodus · February 4th, 2013, 17:00

Quote:

Originally Posted by M.Garcia

Quick question. Is it recommended a MOSFET is used for all AEGs? Or only ones with certain requirements?

Definitely, it saves your trigger contacts and especially with Lipos. I must get these FET's for my guns!

Stealth · February 4th, 2013, 20:10

Just finished up the mechbox and did a quick round of testing. Updated first post.

wind_comm · February 4th, 2013, 20:16

the ASM thread on this would like to point out your cold solder joints.
might it be contributing to your FET heating slightly?

not powerful enough for some of us crazier folk =D but might go into some lower end builds. also, the whole "not enough space" argument goes out the window now. cool beans.

Stealth · February 4th, 2013, 20:23

Oh wow we made it to ASM. Must be doing something right.
Yeah I already admitted my shitty joints and John was ragging on me this morning. I was more tired and excited to get the thing hooked up to be bothered with the aesthetics of some solder joints. The joints are solid, it just looks bad.
It most certainly isn't my proudest work. I've done better.

Agreed, it's not for crazy builds (>500fps and/or 40+rps DSG builds). But as Terry said, it'll work very well for 98% of airsoft guns.

Spike · February 4th, 2013, 20:27

I would be terrified to place it there.... it feels like you'd forget and snap it.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 3rd, 2013, 21:53	#1
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Gate PicoSSR - The MOSFET that'll blow your mind Well, it blew my mind anyway. There's a FET somewhere in this picture: Oh, there it is. Boner jams. I did a more risky install and soldered it directly to the Deans connector MERF 3.2 style rather than having some lengths of wiring between the FET and plug. Hopefully it holds up, I added some bonus solder to the top of the negative plug. Sloppy-ass work. LOL Performance Report: Just wrapped it up and here's what it looks like at the end of the buffer tube. It's very inconspicuous and is holding up fantastic. The finished product (was going for a John Noveske N4 Desert Crusader Tribute thing. Turned out to be a cute little SBR instead) Did a quick round of testing. Specs of gearbox: Modify SMOOTH Modular Nano-Torque gearset (which BTW are not smooth at all and sound like crap. And you can't shim them. Don't get these gears.) X High Tech ultra high torque Neo motor Turnigy Nanotech 11.1v 1400mah 25-50C lipo 400fps spring (found it in my parts bin) Verdict: It holds up very well to a mild build - relatively high discharge battery and neo motor. Under sustained semi-auto fire (3 rounds per second for 30 seconds) the FET does get a bit warm, similar to the GDS-4005. I'm going to put in an M150 spring soon... Last edited by Stealth; February 4th, 2013 at 22:49..

February 3rd, 2013, 22:04	#2
phloudernow Trader rating Join Date: Nov 2010 Location: Toronto - Ontario, Vancouver - B.C and Hong Kong	What are the features on it? is it up on your website yet? thinking of putting one in my LCT AK Edit: Nvm found it on your website THIS IS AWESOME __________________ Current Lineup: VFC HK416 Custom Custom Bowie Tactical x SAI Glock 17 (TM Base), Custom SAI BLU Glock Build (Timberwolf Base) Custom Zev Noveske Shooting Team Glock 34 Project Guns Custom Zev Dragonfly G17 (Project) (In progress) Last edited by phloudernow; February 3rd, 2013 at 22:06..

February 3rd, 2013, 22:57	#4
horto Trader rating Join Date: Jun 2009 Location: Toronto	Wow. __________________ H-61 "Acta non verba" They see us rollin, they hatin...

February 3rd, 2013, 22:08	#3
K3vX Trader rating Join Date: May 2012 Location: Quebec City	Nice idea to install it. Damn that mosfet is small. I ordered the AB one, and will probably post pictures when I install it.

February 4th, 2013, 01:05	#5
JLiang Trader rating Join Date: Jan 2012 Location: Waterloo, ON	Brb retrieving wallet __________________ []]]]]]]]]]]]]]]]] ------)_'_\ * ( "----------\ * \ "-----------\_*_\

February 4th, 2013, 01:26	#6
nstahl.19 Trader rating Join Date: Oct 2012 Location: Kitchener, ON	Nice, much smaller then the smallest one I was considering. How stable is soldering it directly on the connector, looks good.

February 4th, 2013, 14:32	#8
M.Garcia M.Garcia M.Garcia M.Garcia Trader rating Join Date: Jul 2008 Location: Kitchener, ON	Quick question. Is it recommended a MOSFET is used for all AEGs? Or only ones with certain requirements?

February 4th, 2013, 15:19	#9
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	Never hurt to have one on all guns. That's tiny. With some fancy work you could put that little guy right inside the gear box I'd bet! __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

February 4th, 2013, 16:22	#10
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	if there is room, shrink wrap each wire, and then get the bigass shrinkwrap and wrap the entire deans end and both wires... this makes it a lot more stable cause now you're bracing the entire length of the wrap against 2 wires.. the tradeoff is space.. you won't be able to bend that segment that's essentially triple wrapped. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

February 4th, 2013, 20:10	#12
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Just finished up the mechbox and did a quick round of testing. Updated first post.

February 4th, 2013, 20:16	#13
wind_comm Trader rating Join Date: Jul 2011 Location: Calgary/Vancouver	the ASM thread on this would like to point out your cold solder joints. might it be contributing to your FET heating slightly? not powerful enough for some of us crazier folk =D but might go into some lower end builds. also, the whole "not enough space" argument goes out the window now. cool beans. __________________ too busy tinkering to play.

February 4th, 2013, 20:23	#14
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Oh wow we made it to ASM. Must be doing something right. Yeah I already admitted my shitty joints and John was ragging on me this morning. I was more tired and excited to get the thing hooked up to be bothered with the aesthetics of some solder joints. The joints are solid, it just looks bad. It most certainly isn't my proudest work. I've done better. Agreed, it's not for crazy builds (>500fps and/or 40+rps DSG builds). But as Terry said, it'll work very well for 98% of airsoft guns. Last edited by Stealth; February 4th, 2013 at 21:10..

February 4th, 2013, 20:27	#15
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	I would be terrified to place it there.... it feels like you'd forget and snap it. __________________ I change primaries like other people change socks.

Gate PicoSSR - The MOSFET that'll blow your mind

Upgrades & Modifications