REDUCING FPS with a ported cylinder?

[Jimski]

Originally Posted by ILLusion

Also note, that if you're hitting 415fps with your hop up completely off, your velocity should drop to around 400-405fps once you adjust your hop up to the proper level.

hey thanks, I didn't know that.

I solved the pb differently: gonna use another AEG.

and btw with that other aeg, I had another problem:
I ordered an unported Systema Cylinder, and omfg, it was a few microns bigger than the stock TM ported cylinder.
I solved this problem with a 2$ O-ring from Master Plumber bought at Rona; I didn't know it was possible.(it's the 10 rings set No 659 A )
fits perfectly the new cylinder!
So now I have another AEG working @ under 400 fps.
Which I'm gonna use...I'll also cut a few coils on the spring in the other one.


thanks to all!

ps:
cheating on the fps measurement is stupid: if anyone is hurt with one of your BBs, you AEG will be chronied again, with proper .20 bbs, and whatever the previous situation was, all of a sudden you are 100% guilty.Think about it.

[testtube]

They will be chronied with Bastards.

[Zekk05]

just so this doesnt spin out of control, Spa is a new member on my team this season, and he as trustworthy as the next. This is just a misunderstanding here as he has an awkward sense of humor which doesnt translate onto the forums to well. His behavior since he's joined my team has been nothing less than honorable and I guarantee there's no need to be alarmed.