G&G Handguard Panel set

[Detachedefficiency]

I recently picked up a set of G&G Handguard panels and I had two questions about them. One of the panels has a smooth section running down the middle of it and I was wondering what the point of this was as well as which rail this panel was intended for. My other question is simply how to lock them in place. Thanks in advance.

[redneck12]

A pic would help so we know what your are talking about. But if your talking about rail covers, most of the ones I know of that have a flat smooth area thats for mounting a tape switch for a light or laser.

[Detachedefficiency]

http://www.badlandspaintball.com/ass...ear-Canada.jpg
This is the exact set I have. In that case the one for the thumb switch will be mounted on the left side, thanks.

[redzaku]

Originally Posted by Detachedefficiency

http://www.badlandspaintball.com/ass...ear-Canada.jpg
This is the exact set I have. In that case the one for the thumb switch will be mounted on the left side, thanks.

i want to guess the bottom rails

[redneck12]

Flat spot is for mounting a tape switch and to lock those in place on your rail u pop the black metal tab at the end and once its on the rail where you want it u push the locking tab back in. Just use a falt head screwdriver, but make sure you don't pull to hard just till u hear a click.

[Styrak]

Originally Posted by redneck12

Flat spot is for mounting a tape switch and to lock those in place on your rail u pop the black metal tab at the end and once its on the rail where you want it u push the locking tab back in. Just use a falt head screwdriver, but make sure you don't pull to hard just till u hear a click.

You actually just push them down with a finger.

[Detachedefficiency]

Well thank you gentleman, this has helped immensely, the handguards are in place, no more torn gloves or chipped rails.