Airsoft Canada - View Single Post

koztah · February 18th, 2009, 23:58

I have this KWA USP and I'm trying to swap the slide for one with trades.

The problem is, I can't seem to get the damn blowback assembly out.

I removed the screw with an allen key, removed the rear sight and the whole assembly sort of wobbles but won't come out.

If you look at this diagram:

http://s78.photobucket.com/albums/j1...s/ee7e6801.jpg

I think part #3 is keeping it in there, but I can't for the life of me figure out how to get it off.

Also, trying to get the inner barrel out of the outer barrel, there's this small pin I think is holding it in, and I'm unsure how to get that pin out also.

Any input would help.

February 18th, 2009, 23:58	#1
koztah Trader rating Join Date: Apr 2007 Location: Montreal, Qc	KSC/KWA USP slide disassembly I have this KWA USP and I'm trying to swap the slide for one with trades. The problem is, I can't seem to get the damn blowback assembly out. I removed the screw with an allen key, removed the rear sight and the whole assembly sort of wobbles but won't come out. If you look at this diagram: http://s78.photobucket.com/albums/j1...s/ee7e6801.jpg I think part #3 is keeping it in there, but I can't for the life of me figure out how to get it off. Also, trying to get the inner barrel out of the outer barrel, there's this small pin I think is holding it in, and I'm unsure how to get that pin out also. Any input would help.