Quote:
Originally Posted by mateba
Are TM gears compatible with King Arms bearings? I had issues with them and Systema bearings. I know the first set was off. The sector gear had too much side to side play and was too high off the spur gear. The second time around I thought I had it right. The SP90 spring is a 1J spring (330-340 pre-settled) if that too strong? I'll try TM gears again.
Not in 600 rounds time. Thats a little too fast.  |
Yes, usually it's the piston that gives out first. But was point out that he shimmed it incorrectly.
Shimming correctly is MORE than just the relationship between the gears and the mechbox, proper shimming also is the relationship between the gears themselves to make sure they get maximum tooth mesh but with enough clearance between the gears themselves.