Airsoft Canada - View Single Post - Silencer is effecting full-automatic on TM G36C

specter_M4 · February 25th, 2008, 12:23

Hey,

I recently aqquired a TM G36C.

Almost everything has been upgraded:

piston head Deepfire aluminum ball bearing
lightweight piston
systema spring guide ball bearing
systema airseal nozzle
systema 6mm bushings
TM gear set
Pro winn hop up
systema hop up rubber
systema tappet plate
systema barrel
M110 spring

I use a 9.6 volt 1700mAh Battery. The gun has afairly high Rof.

My problem is that when I put my silencer on and fire in automatic, lets say I hold the trigger and cycle the piston 10 times only about 5 rounds will be projected. These 5/10 bbs projected have a terrible flight path and about 1/3 the range as a regular shot.

This problem only occurs in automatic with the silencer on. It cycles every round and fires straight in semi with the silencer attatched. When the silencer comes off the problem disapears. Now, when the battery is low it will fire fine in automatic through the silencer hmm...

The problem is obviously caused by the high rof which is caused by the battery. I figure if I uprgraided the spring it would help but then I couldn't use it indoors for CQB. As of now it shoots 350fps on the nose. I could always use a velocity reducer however then I wouldn't use the silencer.

The silencer is 206mm long and I have inlcuded a picture of it below.

What causes this problem? How can I fix the problem so I can fire in automatic with the silencer on?

Thanks

February 25th, 2008, 12:23	#1
specter_M4 Trader rating Join Date: Feb 2002 Location: Calgary, Alberta	Silencer is effecting full-automatic on TM G36C Hey, I recently aqquired a TM G36C. Almost everything has been upgraded: piston head Deepfire aluminum ball bearing lightweight piston systema spring guide ball bearing systema airseal nozzle systema 6mm bushings TM gear set Pro winn hop up systema hop up rubber systema tappet plate systema barrel M110 spring I use a 9.6 volt 1700mAh Battery. The gun has afairly high Rof. My problem is that when I put my silencer on and fire in automatic, lets say I hold the trigger and cycle the piston 10 times only about 5 rounds will be projected. These 5/10 bbs projected have a terrible flight path and about 1/3 the range as a regular shot. This problem only occurs in automatic with the silencer on. It cycles every round and fires straight in semi with the silencer attatched. When the silencer comes off the problem disapears. Now, when the battery is low it will fire fine in automatic through the silencer hmm... The problem is obviously caused by the high rof which is caused by the battery. I figure if I uprgraided the spring it would help but then I couldn't use it indoors for CQB. As of now it shoots 350fps on the nose. I could always use a velocity reducer however then I wouldn't use the silencer. The silencer is 206mm long and I have inlcuded a picture of it below. What causes this problem? How can I fix the problem so I can fire in automatic with the silencer on? Thanks __________________ Last edited by specter_M4; February 25th, 2008 at 12:26..