Airsoft Canada - View Single Post

BC_K · November 26th, 2007, 00:36

ALL AEG's shoot .2g bb's, they can also shoot .12, .25, .28 and many other variations of 6mm bb's.

6mm airsoft ammo is pretty universal across the board.

As much as I loved the performance and reliability of my CA33E, it's just a pain in the ass to get ANY external parts for the gun, an magazines are hard to come by as well.

I had the metal body on my CA33E break during shipping and I wasn't able to get a new one for months.

A G3 variant you can just steal the metal body or plastic one off of a TM G3, as far as I know.

You HAVE to buy from a Canadian retailer or customs will seize and destroy your goods, you require proper import licenses/ect.

You say your not so new here, then you should be aware of the FAQ's section and the AGE VERIFICATION proccess required in order to purchase airsoft goods.

Simply put, you must be 18+

You don't see the guns for sale at A&A? Just call them or email them and they can order it in for you.

They didn't have my CA33E metal body listed but they ordered it for me.

BTW, I've owned a CA33E and a TM G3A4/SG1 (Only difference is the stock, slither or fixed.) Both guns have been upgraded to 400fps and have most internal components replaced.

Man I miss them, the G3 was a bit creaky tho, the plastic body flexes, but the CA33E comes full metal, no creaking, an god damn, I could NOT make the gun jam at all.

I purposely tried to screw the gun up but just was not able to! It's excellent for ANY playing area, CQB, Mid or Long Range.

Here's for long range.

Here's for mid.

An for CQB I've mad a PDW variant of the CA33E.

You can do ANYTHING to this gun you want.

V2 Gearbox has EVERYTHING available for it, pretty much "if it can go in an M4/M16, it can go right into this", as they have the same mechbox.

UMP Stock, MP5K PDW Stock, slither stock, full stock, M4 collapsable, you name it. As for barrels, I've used the stock 429 mm barrel, had a shortened one with NO outter barrel at all, dont remember the length, an up to a 550mm 6.03mm tightbore.

So god damn accurate hehe.

Anywho enough rambling on, got any questions about either gun post them here or you can private message me.

November 26th, 2007, 00:36	#5
BC_K Banned Trader rating Join Date: Mar 2004	ALL AEG's shoot .2g bb's, they can also shoot .12, .25, .28 and many other variations of 6mm bb's. 6mm airsoft ammo is pretty universal across the board. As much as I loved the performance and reliability of my CA33E, it's just a pain in the ass to get ANY external parts for the gun, an magazines are hard to come by as well. I had the metal body on my CA33E break during shipping and I wasn't able to get a new one for months. A G3 variant you can just steal the metal body or plastic one off of a TM G3, as far as I know. You HAVE to buy from a Canadian retailer or customs will seize and destroy your goods, you require proper import licenses/ect. You say your not so new here, then you should be aware of the FAQ's section and the AGE VERIFICATION proccess required in order to purchase airsoft goods. Simply put, you must be 18+ You don't see the guns for sale at A&A? Just call them or email them and they can order it in for you. They didn't have my CA33E metal body listed but they ordered it for me. BTW, I've owned a CA33E and a TM G3A4/SG1 (Only difference is the stock, slither or fixed.) Both guns have been upgraded to 400fps and have most internal components replaced. Man I miss them, the G3 was a bit creaky tho, the plastic body flexes, but the CA33E comes full metal, no creaking, an god damn, I could NOT make the gun jam at all. I purposely tried to screw the gun up but just was not able to! It's excellent for ANY playing area, CQB, Mid or Long Range. Here's for long range. Here's for mid. An for CQB I've mad a PDW variant of the CA33E. You can do ANYTHING to this gun you want. V2 Gearbox has EVERYTHING available for it, pretty much "if it can go in an M4/M16, it can go right into this", as they have the same mechbox. UMP Stock, MP5K PDW Stock, slither stock, full stock, M4 collapsable, you name it. As for barrels, I've used the stock 429 mm barrel, had a shortened one with NO outter barrel at all, dont remember the length, an up to a 550mm 6.03mm tightbore. So god damn accurate hehe. Anywho enough rambling on, got any questions about either gun post them here or you can private message me.