Airsoft Canada - View Single Post

MadMax · November 19th, 2007, 23:09

The followers don't get fed into the breech and fired. They can sometimes come out of the mag top and fall out when the mag is changed. The diameter of the follower is too large to fit into the breech and down the barrel.

The disconnecting cylinder is not exactly a new issue. I have seen it in one Gen3 PTW. It's possible that there are some M130 cylinders which are an old build. Inventory circulation may have brought problematic product into the market.

There really isn't much point to dissing an entire product in a problem discussion thread when a very simple and affordable fix deals with the very same problem. Slagging something, at length, that is very easily fixed is a waste of pixels.

Granted it's very a very goofy problem. At least it's easily dealt with unlike many core failures that can persist in some AEGs.

November 19th, 2007, 23:09	#12
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	The followers don't get fed into the breech and fired. They can sometimes come out of the mag top and fall out when the mag is changed. The diameter of the follower is too large to fit into the breech and down the barrel. The disconnecting cylinder is not exactly a new issue. I have seen it in one Gen3 PTW. It's possible that there are some M130 cylinders which are an old build. Inventory circulation may have brought problematic product into the market. There really isn't much point to dissing an entire product in a problem discussion thread when a very simple and affordable fix deals with the very same problem. Slagging something, at length, that is very easily fixed is a waste of pixels. Granted it's very a very goofy problem. At least it's easily dealt with unlike many core failures that can persist in some AEGs. __________________ Want nearly free GBB gas?