[Corpo]

1) TM P90 TR
-
2) not 100% sure, some time in spring 2006
-
3) ~$500
-
4) New
-
5) Mechanical Problems - NONE
-
6) Esthetic Problems - Right side rail mount slightly loose, may be due to flashlight mounted on it being pressed on. silencer easily scratched.
-
7) ~10000 bb fired
-
8) upgraded december 2006 with systema helical torque up gears, hop-up sleeve, bushings and shims, stop latch, cylinder, unknown brand of spring guide, piston, km tappet plate, spring, gaurder air nozzel, km tn 343mm 6.04 barrel, promethues pom bearing piston head, km .8j and 1.4j springs switched indoor to outdoor. ~3000 bb's fired
-
9) N/A.

10) Very relible, quiet. love this gun

EDIT/UPDATE: April 27 2008. so i finally had a failure using my p90. not of the typical sort either. in my firing assembly there is what i can only call a semi auto stop lever. when you push the trigger in something pushes this lever and it stop the action. i'm not too sure what it is for, but the trigger assembly (right on the mechbox) was butting up againts it. preventing me from touching the contacts and firing. the gun was dead. so as a quick fix i removed the lever. only to find i no longer have semi auto function. i am not sure if i can repair it or not as of yet.


1) TM M9 Tactical Master
-
2) Spring 2006
-
3) ~$250
-
4) New
-
5) Mechanical Problems - Slide lock problems, slide doesn't always lock after clip is emptied, ~2000 bb's fired issue is happening more and more often.

two mags bought, one leaks.
-
6) Esthetic Problems - None
-
7) NO MAJOR FAILURES, ~2000 bb's
-
8) Spring 2007 installed real beretta wood grips, a odd resulting issue is while the gun has its saftey on and a proper grip of the gun is held the hammer somtimes catches a little bit, possilbly worn out safety catch
-
9) N/A.
-
10) N/A