Airsoft Canada - View Single Post

stokes · February 15th, 2006, 18:20

There could be two reasons for the double feeding. I just corrected mine.

1- The hopup system is to tight on the bb which causes the bb to stay in the hopup chamber. This would cause 2 bbs to enter the chamber and be shot out. Check this by taking out the hop up with the inner barrel. Manually place in a BB and blow it out. It should escape quite easily with little resistence. But also be able to hold the bb there.

2- The antireversal spring is damaged or is installed incorrectly this would cause 2 or more bbs to enter the hopup chamber. Check the spring for damage.

February 15th, 2006, 18:20	#4
stokes Trader rating Join Date: Dec 2005 Location: Toronto	There could be two reasons for the double feeding. I just corrected mine. 1- The hopup system is to tight on the bb which causes the bb to stay in the hopup chamber. This would cause 2 bbs to enter the chamber and be shot out. Check this by taking out the hop up with the inner barrel. Manually place in a BB and blow it out. It should escape quite easily with little resistence. But also be able to hold the bb there. 2- The antireversal spring is damaged or is installed incorrectly this would cause 2 or more bbs to enter the hopup chamber. Check the spring for damage.