Airsoft Canada - View Single Post

Bigload · July 11th, 2016, 23:57

I am not sure if there is a BB's review thread already. But I just wanted to share some info.

BB's: Infinity Brand 0.25
Temp 28-30 oC
Rifle / Pistol - We GBBR / We G17 / KJW KC02

Issues:

1. WE M4 : caused my nozzle arm to break, BB's shattered, 6 bb's jammed firmly inside hop chamber. I had to shave down / file down the bb's for it to free up.

2. WE G17 : BB's mis-feed and sat in the blowback housing.

3. Another WE M4 : caused bb's to shatter before hop chamber, BB bits were all stuck outside of chamber

4. Just found out - on the same day using same BB's - I opened my KC-02 and found a BB sitting INSIDE MY NOZZLE behind the valve.

If you are a GBBR user, avoid this brand. This brand might work with AEG's (I haven't tried it), but I will only use this brand for my Spring Sniper.

July 11th, 2016, 23:57	#1
Bigload Trader rating Join Date: Jul 2012 Location: Stouffville	BB's review I am not sure if there is a BB's review thread already. But I just wanted to share some info. BB's: Infinity Brand 0.25 Temp 28-30 oC Rifle / Pistol - We GBBR / We G17 / KJW KC02 Issues: 1. WE M4 : caused my nozzle arm to break, BB's shattered, 6 bb's jammed firmly inside hop chamber. I had to shave down / file down the bb's for it to free up. 2. WE G17 : BB's mis-feed and sat in the blowback housing. 3. Another WE M4 : caused bb's to shatter before hop chamber, BB bits were all stuck outside of chamber 4. Just found out - on the same day using same BB's - I opened my KC-02 and found a BB sitting INSIDE MY NOZZLE behind the valve. If you are a GBBR user, avoid this brand. This brand might work with AEG's (I haven't tried it), but I will only use this brand for my Spring Sniper. __________________ M4 MK12 MOD0, SBR, KC02 G17 (B. A. Level 2 Cert.) Last edited by Bigload; July 12th, 2016 at 01:51..