Airsoft Canada - View Single Post

ShelledPants · March 30th, 2016, 09:10

Secondly, I hardly think that shaving a few grams with make much difference, you're better off tinkering with the hammer spring which is set up to be very strong for CO2, much more than a 150% spring for green gas. If you swapped that out for a regular TM spring or a 150% Guarder spring, I'm positive you will get better gas efficiency with a reduction in kick.

Lightweight BBU's are for very light slides and the KJW is anything but. Not to mention I would be very surprised if it fit without modification, KJW tends to have different tolerances than TM, and those are all made for TM guns.

March 30th, 2016, 09:10	#5
ShelledPants Trader rating Join Date: Feb 2008 Location: Toronto, On	Secondly, I hardly think that shaving a few grams with make much difference, you're better off tinkering with the hammer spring which is set up to be very strong for CO2, much more than a 150% spring for green gas. If you swapped that out for a regular TM spring or a 150% Guarder spring, I'm positive you will get better gas efficiency with a reduction in kick. Lightweight BBU's are for very light slides and the KJW is anything but. Not to mention I would be very surprised if it fit without modification, KJW tends to have different tolerances than TM, and those are all made for TM guns. __________________ Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur.