Airsoft Canada - View Single Post

Theesire · December 21st, 2014, 19:52

I have a G&G top-tech RK Evo 104. I'm currently satisfied with it's performance though I was seeking to improve trigger response and fire rate.

Currently it is entirely stock but I am running deans connecters and a 9.6 1600mAh nimh butterfly battery.

I want to aim for around 30RPS, 380-400FPS, and a good trigger response.
My planned build for this would be:

-SHS high torque or Lonex A2, from what I've been told they're both 16tpa and contain neo magnets.

-SHS 13:1 gears, I've watched a few of the ramble videos made by youtube user BrillAirsoft (formerly CommieKid) and it seems common for people to mix high speed gears with a high torque motor in order to achieve a good fire rate and a great trigger response, I'll be using my AK in a lot of situations where full auto fire will be used but I don't want that at the cost of being able to use it effectively in semi-auto situations and the stock trigger response (very good already) has led to some crazy last second hits.

-Shimming of course.

-11.1 lipo, no idea which c rating I should search for.

-I've had some people tell me I don't need a MOSFET and others tell me I'm retarded and I should break my gun now if I don't get one. I'm just planning to run my AK without one until I burn out my contacts then get myself a nice MOSFET, opinions welcome though.

So is there anything wrong with this build? Will my gearbox magically explode the second I try firing with these specs?
Should I correct AOE or apply sorbo padding?
Can I reach 30rps with a high torque motor, high speed gears, and an 11.1?
Which 11.1 would be sufficient for this build?
Could I use my 9.6 as a back up for this build?
Should I get a MOSFET right away?

December 21st, 2014, 19:52	#1
Theesire Banned Trader rating Join Date: Mar 2014	Would these parts meet my needs? I have a G&G top-tech RK Evo 104. I'm currently satisfied with it's performance though I was seeking to improve trigger response and fire rate. Currently it is entirely stock but I am running deans connecters and a 9.6 1600mAh nimh butterfly battery. I want to aim for around 30RPS, 380-400FPS, and a good trigger response. My planned build for this would be: -SHS high torque or Lonex A2, from what I've been told they're both 16tpa and contain neo magnets. -SHS 13:1 gears, I've watched a few of the ramble videos made by youtube user BrillAirsoft (formerly CommieKid) and it seems common for people to mix high speed gears with a high torque motor in order to achieve a good fire rate and a great trigger response, I'll be using my AK in a lot of situations where full auto fire will be used but I don't want that at the cost of being able to use it effectively in semi-auto situations and the stock trigger response (very good already) has led to some crazy last second hits. -Shimming of course. -11.1 lipo, no idea which c rating I should search for. -I've had some people tell me I don't need a MOSFET and others tell me I'm retarded and I should break my gun now if I don't get one. I'm just planning to run my AK without one until I burn out my contacts then get myself a nice MOSFET, opinions welcome though. So is there anything wrong with this build? Will my gearbox magically explode the second I try firing with these specs? Should I correct AOE or apply sorbo padding? Can I reach 30rps with a high torque motor, high speed gears, and an 11.1? Which 11.1 would be sufficient for this build? Could I use my 9.6 as a back up for this build? Should I get a MOSFET right away?