Airsoft Canada - View Single Post - Accurate AEG @ 150+ ft with heavier BB's under $500

lurkingknight · March 23rd, 2014, 20:34

any gun with a reputable hop up chamber casting... compression/reliability upgrades and a pdi w hold will get those results easily.

if your local fields allow for greater than 1.48J then you should be using heavier than .28s.

I use .32s at 1.4J to devastating effect, but I also have full blown r-hop setups with very little fps variance (air leaks)

150ft is only 45m. You should be able to hit a man sized target consistently with any AEG out of the box using .28s.

In comparison I'm hitting 10" pie plates at that range.

The biggest problem with accuracy out of the box in any gun is air seal consistency. You can't expect the BB to hop the same from one shot to the next when the first shot leaves at 390 fps and the next one at 360.

March 23rd, 2014, 20:34	#5
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	any gun with a reputable hop up chamber casting... compression/reliability upgrades and a pdi w hold will get those results easily. if your local fields allow for greater than 1.48J then you should be using heavier than .28s. I use .32s at 1.4J to devastating effect, but I also have full blown r-hop setups with very little fps variance (air leaks) 150ft is only 45m. You should be able to hit a man sized target consistently with any AEG out of the box using .28s. In comparison I'm hitting 10" pie plates at that range. The biggest problem with accuracy out of the box in any gun is air seal consistency. You can't expect the BB to hop the same from one shot to the next when the first shot leaves at 390 fps and the next one at 360. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; March 23rd, 2014 at 20:38..