Airsoft Canada - View Single Post

lurkingknight · June 5th, 2013, 10:59

the prommy is pretty much the only one on the market. OEM from tm or ca if you can get them don't last long. I think you can get an e1/ks one direct from echo1 as well.. but it's shitty potmetal and grinds down very quickly.

You can extend the life of the cutoff lever by bending it upwards a tiny bit when it's worn, you can also enlarge the window to allow it to rotate deeper towards the cam on the sector gear.

June 5th, 2013, 10:59	#4
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	the prommy is pretty much the only one on the market. OEM from tm or ca if you can get them don't last long. I think you can get an e1/ks one direct from echo1 as well.. but it's shitty potmetal and grinds down very quickly. You can extend the life of the cutoff lever by bending it upwards a tiny bit when it's worn, you can also enlarge the window to allow it to rotate deeper towards the cam on the sector gear. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; June 5th, 2013 at 11:01..