Airsoft Canada - View Single Post

-Shade · March 5th, 2013, 16:16

I believe what I read before was talking about the v7 gears getting stuck on the extra plastic used to hold/slide the metal piece.

If you've seen that SHS work with a tm clone before, then I'll go for the SHS on your site. The other problem is that I don't have access to a tool to file down the metal to correct the AoE - if I were to order from airsoft parts canada, would they be able to shave down the second tooth as recommended and a bit of the third as well for me? Or is it more complicated than that? I figured I'd just use the sorbo pads I ordered from you guys to correct it if it was filed down.

March 5th, 2013, 16:16	#5
-Shade Trader rating Join Date: Feb 2013 Location: Oakville - ON	I believe what I read before was talking about the v7 gears getting stuck on the extra plastic used to hold/slide the metal piece. If you've seen that SHS work with a tm clone before, then I'll go for the SHS on your site. The other problem is that I don't have access to a tool to file down the metal to correct the AoE - if I were to order from airsoft parts canada, would they be able to shave down the second tooth as recommended and a bit of the third as well for me? Or is it more complicated than that? I figured I'd just use the sorbo pads I ordered from you guys to correct it if it was filed down. Last edited by -Shade; March 5th, 2013 at 16:23..