Quote:
Originally Posted by DustMagnet
Ok, you did two things - replaced the bushing and put in a stiffer spring.
If you put in a stiffer spring, wouldn't that cause the piston to return faster than previously? And if so, doesn't that alter the relationship between the tappet plate returning and the piston head returning?
You can try putting the original spring back in. If that solves it then a stiffer tappet plate and tappet return spring sounds like it is the way to go.
|
Spring strength has nothing to do with this. By the time the piston is released, the nozzle has long since returned into the hopup unit/rubber.