Airsoft Canada - View Single Post

shaharov · January 27th, 2012, 19:35

Armen, In your bottom picture it looks like your missing your part 30 which may cause issues. Also if your trigger bar is worn I'm guessing it will cause full auto and double taps as a mod to create full auto is to shave the trigger bar. This also prevents safety from working.

Lyphe, yea.. the compensator is a little too long. You probably would have to replace the inner barrel (which can be done, I believe) with a shorter one, as long as the outer barrel is in good order. Shortening the inner barrel yourself isn't recommended as any bend or burr will cause issues with firing. Also there is a small pin and spring that is in the safety in the slide that makes the safety go into 3 places. I found that when taking the safety out it springs out and can be lost quite easily without one noticing. If you load the parts diagram I can point it out to you. Part #30 doesnt do this (cause the safety to click in place) but actually uses the trigger bar to select firing mode and safety. Replcement part #30 for the full auto can be purchased from evike

I ordered part 30 and a new trigger bar for my M190 and we'll see if I can do a change from semi to full auto. Also ordered a WE slide assembly for it as it's supposed to be TM compatible (I want an adjustable hopup as I use 0.28bb's in my pistols) and will see if that works and if so if I can do the full auto mod... alotta "if"s. I'll keep you guys posted as to the progress (even try to take some pictures). If everything goes well with what I want to do I may have a full auto slide assembly (m190 original) for sale. Guess we'll see.

January 27th, 2012, 19:35	#13
shaharov Trader rating Join Date: Jul 2009 Location: Duncan, BC (just North of Victoria)	Armen, In your bottom picture it looks like your missing your part 30 which may cause issues. Also if your trigger bar is worn I'm guessing it will cause full auto and double taps as a mod to create full auto is to shave the trigger bar. This also prevents safety from working. Lyphe, yea.. the compensator is a little too long. You probably would have to replace the inner barrel (which can be done, I believe) with a shorter one, as long as the outer barrel is in good order. Shortening the inner barrel yourself isn't recommended as any bend or burr will cause issues with firing. Also there is a small pin and spring that is in the safety in the slide that makes the safety go into 3 places. I found that when taking the safety out it springs out and can be lost quite easily without one noticing. If you load the parts diagram I can point it out to you. Part #30 doesnt do this (cause the safety to click in place) but actually uses the trigger bar to select firing mode and safety. Replcement part #30 for the full auto can be purchased from evike I ordered part 30 and a new trigger bar for my M190 and we'll see if I can do a change from semi to full auto. Also ordered a WE slide assembly for it as it's supposed to be TM compatible (I want an adjustable hopup as I use 0.28bb's in my pistols) and will see if that works and if so if I can do the full auto mod... alotta "if"s. I'll keep you guys posted as to the progress (even try to take some pictures). If everything goes well with what I want to do I may have a full auto slide assembly (m190 original) for sale. Guess we'll see. __________________ Friendly Fire...... ISN'T!!