Airsoft Canada - View Single Post - WE 4.1 Hi-Capa Problem!

ILLusion · December 17th, 2011, 22:58

The assembly should just drop right out after you've removed the screw from the back of the slide, and the top of the rear sight. Confirm it's cracked before we look in to buying a nozzle.

The other potential cause of the problem is a non functioning floating valve, but the design is generally very reliable. Chance of failure is very low, but you can check that at the same time you check the nozzle. If you see no crack on the nozzle, then you can go deeper to check the floating valve.

December 17th, 2011, 22:58	#6
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	The assembly should just drop right out after you've removed the screw from the back of the slide, and the top of the rear sight. Confirm it's cracked before we look in to buying a nozzle. The other potential cause of the problem is a non functioning floating valve, but the design is generally very reliable. Chance of failure is very low, but you can check that at the same time you check the nozzle. If you see no crack on the nozzle, then you can go deeper to check the floating valve. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed Last edited by ILLusion; December 17th, 2011 at 23:00..