Airsoft Canada - View Single Post

Slow · September 2nd, 2011, 22:52

This is how i do it...

- Sand
- Put a prestain coat. This makes the wood absorb the stain better
- Take a cloth or a rag and dip it in the stain and apply to wood x4 or to the colour you wish it to be. Nice thing about stain is that it looks like what you put on.

What is needed for this?
Minwax Pre-Stain Wood Conditioner
Minwax American Walnut Stain
Absorbed Rag or Cloth
Sand Paper 60w
Wood

*Forgot to say make sure to wear some laytax gloves, unless you don't care if your fingers turn brown.

September 2nd, 2011, 22:52	#2
Slow Loves Furries Trader rating Join Date: Oct 2009 Location: Manitoba	This is how i do it... - Sand - Put a prestain coat. This makes the wood absorb the stain better - Take a cloth or a rag and dip it in the stain and apply to wood x4 or to the colour you wish it to be. Nice thing about stain is that it looks like what you put on. What is needed for this? Minwax Pre-Stain Wood Conditioner Minwax American Walnut Stain Absorbed Rag or Cloth Sand Paper 60w Wood Forgot to say make sure to wear some laytax gloves, unless you don't care if your fingers turn brown. __________________ If ASC were real life, there would be no Chuck Norris, only CDN_Stalker MANITOBA IVAN Last edited by Slow; September 2nd, 2011 at 23:06..*