Airsoft Canada - View Single Post

pokey · March 26th, 2011, 00:48

Sector gear shimmed to high causing binding with the tappet?? Maybe a shim was mistakingly put on the bottom side of the gear when reassembled? Does the tappet and nozzle move freely before you try to cycle the gearbox?

March 26th, 2011, 00:48	#8
pokey Trader rating Join Date: Apr 2004 Location: SasKat00N, SK	Sector gear shimmed to high causing binding with the tappet?? Maybe a shim was mistakingly put on the bottom side of the gear when reassembled? Does the tappet and nozzle move freely before you try to cycle the gearbox?