Airsoft Canada - View Single Post - Enough Room In Buffer Tube for LiPo and Trigger Master?

NVC · June 4th, 2010, 15:36

Hey GabeGuitarded, I just finished my install of the TM3 unit in my M4 & AK the other night. You can fit a 7.4v 2 cell thin stick lipo in the buffer tube with the TM3 unit but it is very tight. I also have a 11.1V 3 cell Hotpower battery that will not fit with the TM3 unit in the buffer tube. I am using a stock G&P buffer tube and mod stock. What I did was rig a single pistol pouch to the stock as a battery pouch. I now run a 11.1V 2100 mah lipo. Install is clean and the pistol pouch is perfect size for the battery's and small enough so it doesnt get in your way. If you want some reference pics send me a pm. FYI I am using the new wiring kit that Donp sells with the TM3 unit(Trust me the wire kit make the install a breeze) And Thanks to Azathoth and Donp for the install tips!

June 4th, 2010, 15:36	#5
NVC Trader rating Join Date: Jul 2009 Location: Edmonton	Hey GabeGuitarded, I just finished my install of the TM3 unit in my M4 & AK the other night. You can fit a 7.4v 2 cell thin stick lipo in the buffer tube with the TM3 unit but it is very tight. I also have a 11.1V 3 cell Hotpower battery that will not fit with the TM3 unit in the buffer tube. I am using a stock G&P buffer tube and mod stock. What I did was rig a single pistol pouch to the stock as a battery pouch. I now run a 11.1V 2100 mah lipo. Install is clean and the pistol pouch is perfect size for the battery's and small enough so it doesnt get in your way. If you want some reference pics send me a pm. FYI I am using the new wiring kit that Donp sells with the TM3 unit(Trust me the wire kit make the install a breeze) And Thanks to Azathoth and Donp for the install tips! __________________ Custom Kydex Holsters - pm me for details Last edited by NVC; June 4th, 2010 at 15:40..