Quote:
Originally Posted by m102404
Major Upside:
- basically free (to me  )
- kept me out of trouble for 2 evenings
Tys |
Right on man. Home-made goods are great.
I also trimmed my hop up rubber nub; although, I trimmed mine off completely, leaving just a rubber band.
Then I made a longer pre-load bearing, to make up for the lack of depth, created by the complete removal of the nub.
End result; I can turn the hop completely off, or completely on (enough to jam BBs good), and anything in between.
Also, I found the rubber bit in which the nozzle goes into, has to be sanded to remove any flash, that will make your BBs hook. Sighting down the barrel (when removed), will show how much the un-trimmed flashing, will protrude into the way of an incoming BB. Sand until everything is lined up (see rendering)