Airsoft Canada - View Single Post - Tanio Koba / KJW M4 GBBR Basic Information and FAQ

sushi_boy604 · April 21st, 2010, 17:24

Thanks for the help guys. It might help if I added that once I fired a couple of times, it came to the point where I tried to cock the gun but the cocking handle did not retract all the way back to its normal position. It was jammed. Bolt catch was down too so something was definitely jammed in the cocking tube.

As for the receiver, does anyone know if its easy to install the internals? My fear is once I get my replacement, I am afraid that I won't be able to put everything back.

April 21st, 2010, 17:24	#67
sushi_boy604 Trader rating Join Date: Jun 2008 Location: British Columbia	Thanks for the help guys. It might help if I added that once I fired a couple of times, it came to the point where I tried to cock the gun but the cocking handle did not retract all the way back to its normal position. It was jammed. Bolt catch was down too so something was definitely jammed in the cocking tube. As for the receiver, does anyone know if its easy to install the internals? My fear is once I get my replacement, I am afraid that I won't be able to put everything back.