Quote:
Originally Posted by ex
You must have to take the front sight off in order to remove the fake gas tube..No?
|
Well, with my G&G GR16A3, M16A3 Rather, the gas tube came off quite easily, but i dont know if it would be the same as the Blowback version.
Anyways, i just split the gearbox, lower receiver and stock from the top receiver and front set by pushing that pin out. Then i removed the barrel and hopup assembly from the outer barrel. Then removed the top and bottom hand guards. I then gently, but forcefully, pushed the gas tube back into the upper receiver of the gun, when you do this it will be pushed into the upper receiver through the hole in the front. You should be able to see it when looking into the upper receiver from the bottom. It should then slide out of the hole in the front sight set and Tri-ring. With that was enough room to pull out the gas tube forward from the upper receiver.
Hope that helped.