Airsoft Canada - View Single Post

Grumpy · October 1st, 2009, 21:48

I have a stock TM G36C and I just replaced the bushings with G&P 6mm metal bushings, I replaced the spring guide with a Systema Area 1000 Metal Spring Guide (non-bearing style). I also added a SystemA M100 spring and the v3 Gearbox just wont crank over. I tried a full size 8.4 V battery and it's still not enough so I put the stock TM spring back in and all is good. Am I missing something here? Do I need any other parts to make this M100 spring work? The spring looks about an inch longer than the stock TM spring...is there a difference between a V2 and V3 mechbox spring?

Any help would be appreciated

October 1st, 2009, 21:48	#1
Grumpy Trader rating Join Date: Dec 2006 Location: Orleans, ON	M100 Spring too much in G36C? I have a stock TM G36C and I just replaced the bushings with G&P 6mm metal bushings, I replaced the spring guide with a Systema Area 1000 Metal Spring Guide (non-bearing style). I also added a SystemA M100 spring and the v3 Gearbox just wont crank over. I tried a full size 8.4 V battery and it's still not enough so I put the stock TM spring back in and all is good. Am I missing something here? Do I need any other parts to make this M100 spring work? The spring looks about an inch longer than the stock TM spring...is there a difference between a V2 and V3 mechbox spring? Any help would be appreciated __________________ I support Capital Airsoft!