Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Accessories Discussion (https://airsoftcanada.com/forumdisplay.php?f=25)
-   -   CA25 and its accessories (https://airsoftcanada.com/showthread.php?t=41387)

Ronan July 17th, 2007 09:47

CA25 and its accessories
 
Hey all! Now that i have decided on the CA25, i need a scope to go with it.

After talking with some people i decided to go with this one:
http://www.opticsplanet.net/bush-rs-bnr-713946.html

From that site (where i order most of my accessories), which rings do i need to get? I'm getting mix answers from people @_@ (Keep in mind i really don't want to spend to much on the rings^^)

Also, where can i get a good bipod (around $50) for the CA25? On Uncompany.com they told me to get a bipod adapter... is their no bipods that will fit the CA25 w/o having to spend even more extra money lol?

No i don't want to be cheap but after going a bit wild on the upgrades for the CA25 and the gear^^ Lets say the $2000 budget is going down pretty fast :P

Thx :)

Ronan July 17th, 2007 13:31

Any ideas?

Kos-Mos July 17th, 2007 14:15

25mm med or high mount rings

for bipod... just take the one you want..

Cassius July 17th, 2007 16:12

I personally got those rings: http://www.ascarmoury.com/product_in...roducts_id=723

25 to 30mm and high rise :D

Ronan July 17th, 2007 19:24

Never been a fan of high rise rings O_o I'll have to try your's when i'm back in Monteal Cassius :P

Cassius July 17th, 2007 20:37

The good thing about high rise is that you can aim at close range by looking through the holes. Pretty useful sometimes :D

Kos-Mos July 18th, 2007 11:03

You will need med or high rings because of the size of the scope. I have almost the same one (they where out of flat black when I bought mine) and to mount on both an AUG and L96 you will need med or high rings. (I did not had any other rings, but had a riser) because the rails will hit the front or back of the optics... I think the maximum optic size you can fit with low mounts would be 35mm. First picture is a 42mm scope, the two others are 40mm Bushnell scope. In that case it was the zooming knob or the front of the scope that was touching the rail, depending if I pushed foward or backward.

See pic... you will understand...

Plus it's not all that bad. I found it way easier to aim with the scope a bit higher than low. You can always compensate if the scope is a bit high, but it's quite hard to force a gun through your head...

Ronan July 18th, 2007 11:12

I'll grab med rise then :D High rise just... looks freaky O_o

Ronan July 18th, 2007 11:25

Are KSC BB's good? I'm thinking of getting the 0.25 for the CA25. Or someone suggest something better?

Cassius July 18th, 2007 11:28

well it doesn't look that freaky on my SR-16

and Kos-Mos...MMMMMMMH L96 :P


All times are GMT -4. The time now is 15:13.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.