Battery pack to fit my m203
 

Hi,

I need to know about a good battery pack to fit my m203 grenade launcher. I got a TM SR-16 without any upgrades for now, and a 9 inches Classic Army metal barrel. Im open to buy if someone got a good idea/battery pack. The only thing I dont want is a an/peq unit and a full stock. Go see my trade buy sell listing there:

http://www.airsoftcanada.com/showthread.php?t=23079

Thanks!

You can get most any custom battery to fit down the bore, although you'd probably be limited to A-sized cells as Sub C wouldn't stack side-by-side. Sounds like something you'd need to have custom made which isn't a problem for most battery shops. Many of them build airsoft packs and probably wouldn't be averse to you bringing in your gun to look at. Just make sure to call ahead and ask their permission first.

If this is the M203 you purchased just recently, good luck. You've got your work cut out for you. You need to get the wiring from rear to front, ditch your rails and get a single foregrip and maybe shoe-horn a mini battrey in there. Or you could re-install your solid stock and get a large battery. This is WAY BETTER OPTION. But if you insist on going collapsible stock, be ready for some sacrifices in battery capacity if you insist on not using the PEQ/battery box. Sorry to be blunt, but that's my experience in your situation.

take a small battery, buy or make a pouch that goes on the sideof your stock(like a mag pouch) and put your battery in it and your good to go.

If you get a TM M203 and pull the guts out, you'll be able to fit a large battery in there. I've done this already.

This might help you:

http://www.airsoftcanada.com/showthread.php?t=23100