Is it possible to use an AEG barrel and furniture on a GBBR?
 

Hello

I currently have a WE G39C (G36C) which is a GBBR. I want to convert it to a WE G39 K/E (essentially a full sized version). At the same time I wouldn't mind owning a G36C AEG.

So basically since I already own a WE G39C I'm curious to know if I can buy an Ares G36V and mix and match the barrel and furniture. So I end up with a G36C AEG and a full sized G36 GBBR.

Thanks

No, the cut on the hop up end is different.

AEG:
http://shop.ehobbyasia.com/media/cat...9_1_mark_1.jpg

GBBR:
http://shop.ehobbyasia.com/media/cat...509_2_mark.jpg

We need a "like" button.

Is it possible to just buy the proper sized barrels for both guns?

You will need to buy two seperate ones.

AEG Barrels are for AEG's Only.

GBBR Barrels are for GBBR's Only.

Yeah you can buy the barrels separately. They just won't be interchangeable.

So to confirm all the information.

I could take a WE G39 GBBR and UMAREX G36V AEG. Mix and match the furniture so that I have a G36C AEG and a full sized G36 GBBR

Although, I need to buy a G36C AEG barrel and a full sized G36 GBBR barrel.

Then I will have a fully functioning G36C AEG and full sized G36 GBBR.

Stock, upper rail and handguard are compatible. I am not sure if the outter barrel assembly is the same as I've never owned a G36 GBBR.

It won't work, the whole barrel assembly is different. I'm sorry but you'll have to do the WE G39 conversion on it's own. And you'll have to buy a proper G36C AEG.

The G39 uses a design close to real steel. You can see the barrel nut, the gas tube and gas block. The barrel is a piece on it's own.

http://airsoftreviewnz.com/wp-conten...1/image018.jpg
http://shop.ehobbyasia.com/media/cat...39K_1_MARK.jpg

The AEG uses a whole barrel assembly with fixations that screw into the body.

http://shop.ehobbyasia.com/media/cat...-04_mark_1.jpg

^+1 like.

@OP have you considered just buying another WE G39? You could just simply share mags and not bother going the AEG route.

You could convert your G36C into something longer by purchasing a longer handguard and using a simple outer barrel extension. My CA36 outer barrel is just a G36C outer barrel with a full length barrel extension.

Also the length of the stock is different between C and K/E

@BioRage

Yes I considered just getting a full sized WE G39.

Although, I'll probably make more use of a full sized G36 GBBR with the rail optic and adjustable stock. The full sized G36 design feels like its on the borderline of semi-auto sniper and assault rifle. I'm thinking in an outdoor game, a full sized G36 can be really good at engaging at a distance. Then at mid to close range an MP5 AEG or M4A1 GBBR would be better. So if I have a G36C GBBR lying around I might not make much use of it.

If that is the case, take banana's advice and just upgrade the handguard/barrel length. Or use a silencer to cover a longer inner barrel.

Unless you plan on playing a lot of CQB as opposed to outdoor games, then it seems your mind is set on the "K" Variant. No point to sell your current C and buy a brand new K, you would lose out on money.

Good thing about the WE Stang M4 Magazines are you can use them in the M4/Scar/MSK/L85 platforms too.

All about sharing mags, gas mags are to expensive.

I see, so I can just look for a barrel extension and longer hand grip that goes around the barrel. Also, I'm looking for a longer stock. The original stock on the We G39C seems too short for me.

In short, I think the full sized G36 is good for outdoor. Then for CQB I'm aiming for an MP5 or M4A1.

I have some G36 hardware for sale that you may be interested in. I can't link you because I'm on my phone.