Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   I think I broke the air nozzle (https://airsoftcanada.com/showthread.php?t=156657)

Spadona July 18th, 2013 21:49

I think I broke the air nozzle
 
2 Attachment(s)
Hello friends. Help.

Attached I have two pictures I took of my gearbox. I think something broke, and I think it's the air nozzle.

Here's how it went down: I was cleaning my barrel when the piece of tissue came loose and got stuck in the barrel.

[DUMB MISTAKE #1] I used the cleaning rod and tried to free the tissue from the hop-up end by pushing it down the barrel. DIDN'T WORK.
[DUMB MISTAKE #2] For some godforsaken reason, I thought I can get it out if I fired a BB through it.

It worked. The piece of tissue was free. But now, well, see attached.

My guns still fires. How consistently? I don't know. I test fired it twice and both times the bb came out. I didn't want to keep firing in case something else breaks.

Please advise?

R.I.T.Z July 18th, 2013 21:54

when you fired the 3 rounds did the bb just drop out of the end of the barrel?
did your gun make any strange noise when you fired?

because it doesnt look like anythings broken.

Spadona July 18th, 2013 22:06

Quote:

Originally Posted by R.I.T.Z (Post 1816850)
when you fired the 3 rounds did the bb just drop out of the end of the barrel?
did your gun make any strange noise when you fired?

because it doesnt look like anythings broken.

Nothing dropped out when I fired it. The BBs seemingly fired normally.
As for strange sounds, yes. The first shot I took when trying to clear the barrel was muffled, then the second shot was a bit louder than usual. I dry fired it once, and it was also a bit louder than usual. That's about it. My test rounds were pretty normal.

P.S. When I slid off the upper receiver, I noticed a big splooge of what i think is grease around where the air nozzle was. I figured something may have exploded.

GBBR July 19th, 2013 01:12

looks like lithuim grease arround a clear nozzle

Stealth July 19th, 2013 08:34

Did you try actually testing out the gun? That will instantly tell you if something is awry.

Spadona July 19th, 2013 23:57

Quote:

Originally Posted by GBBR (Post 1816902)
looks like lithuim grease arround a clear nozzle

Is it usually suppose to be there?

Quote:

Originally Posted by Stealth (Post 1816939)
Did you try actually testing out the gun? That will instantly tell you if something is awry.

Yes I did. It shoots fine, with nothing seemingly out of the ordinary. I will do an accuracy test soon to see if it has affected anything.

GBBR July 20th, 2013 00:16

well sometimes some lower quality brands tend to "over lube" their gearboxes.
sometimes it just does magically spew grease out the nozzle.

its like that on all my cymas

Styrak July 20th, 2013 00:31

Quote:

Originally Posted by Spadona (Post 1817186)
Yes I did. It shoots fine, with nothing seemingly out of the ordinary. I will do an accuracy test soon to see if it has affected anything.

So if it works fine......what's the issue?

Wrath144 July 20th, 2013 00:44

This thread is really amusing.

Spadona July 20th, 2013 01:34

Quote:

Originally Posted by Styrak (Post 1817194)
So if it works fine......what's the issue?

I'm just being cautious, I suppose.

I tested it and it doesn't seem to have any malfunctions or irregular symptoms. False alarm. Thanks everyone for bearing with me.


All times are GMT -4. The time now is 17:41.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.