King Arm 120 rounds (Mid Cap) Mags loading proces.
 

Hi I have bought 5 King Arms metal mid cap mags , i looked around to know how to load them , I found out that most people use BB loaders to do it but I wanted to know if there's any way to load it without them since the mag spring is all the way up to the hole that connect to the rifle. I do not have a Unscrewing round part on the underpart of the mag.

Get a BB loader. That's the way to load them. Why would you want some alternate way?

Cause I have not bought a BB loader yet and by curiosity hehe.

Just get a bb loader don't try to reinvent the wheel because you'll spend more than half the day reloading mags when you get out to play. That and loaders are cheap sub $10.

Btw great mags, no feeding issues at all on my G&G M16, very sturdy also.

That's the follower that sticks out so you don't loose 3 or 4 rounds when you do a reload.

Use a BB loader or a loading tube. It can still be done by hand but is tedious. Just press down the follower first.

If you can't afford the $5 for a BB loader you can use the bottom of a sharpie to push each BB in one by one.

The sharpie works well. I do that the night before when I first load my mags teadiously, but if I need to reload during the day between matches always chose a speedloader. I use black and white BB Bastard .25s so when I load them the night before I got for a 2 black 1 white ratio. With a single speed loader and mixed bag thats easier said than done. But your probably going to go all white.