Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   Upper Receiver (https://airsoftcanada.com/showthread.php?t=138351)

Carlito564 March 26th, 2012 18:58

Upper Receiver
 
Am I able to import a spare upper receiver shell such as this: http://www.evike.com/product_info.php?products_id=32162

Eeyore March 26th, 2012 19:00

Yes.

Carlito564 March 26th, 2012 19:03

Thank you for the fast response. Also, would it be compatible with a King Arms lower?

Eeyore March 26th, 2012 19:22

It should be. However it may require a bit of fitting as they are not the same brands. Hell even if the upper was a KA it would probably require some fitting.

Carlito564 March 26th, 2012 19:28

Hahah alright thanks. I ended up breaking my KA upper when I attempted to take off that god damn delta ring.

Eeyore March 26th, 2012 20:02

Quote:

Originally Posted by Carlito564 (Post 1628506)
Hahah alright thanks. I ended up breaking my KA upper when I attempted to take off that god damn delta ring.

I've hear this happen before on a VFC.

Danke March 26th, 2012 20:05

I've heard of it happening with a Systema. Don't take shortcuts when you're pulling it apart. Got to have the right vise blocks and wrench.

Eeyore March 26th, 2012 20:07

Quote:

Originally Posted by Danke (Post 1628528)
I've heard of it happening with a Systema. Don't take shortcuts when you're pulling it apart. Got to have the right vise blocks and wrench.

Yes you need an armorers wrench!

Carlito564 March 27th, 2012 13:33

I didn't know there were vise blocks for an M4. I'll have to look into that.

Shatter March 28th, 2012 16:51

Quote:

Originally Posted by Eeyore (Post 1628531)
Yes you need an armorers wrench!

Fuck, really? I've always stuck an allen key into the hole where the fake gas tube goes and turned it.

Time to invest before I break an upper.

Eeyore March 28th, 2012 16:54

I suggest Airsoftparts.ca

kalnaren March 28th, 2012 17:38

Avoid ordering from Evike if you can. They pork Canadian customers.

L473ncy March 28th, 2012 17:47

AirsoftGI is hesitant to ship to Canada as well but it depends on which sales rep you get apparently.

Also I will Echo the avoid Evike sentiment, they ship via UPS and you'll get screwed on border fees and such.

XZIVR March 28th, 2012 18:38

Is "Upper Reciever" the best thread title you could think up?

Carlito564 March 28th, 2012 22:37

Thanks for the info guys. I'll keep it all in mind. And to XZIVR, yes, upper receiver was the best title I could think up haha


All times are GMT -4. The time now is 19:15.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.