JGW M24 APS2Project ~Sempi
 

Hello ASC community, I was hoping to get a litle bit of input on my current project that I am putting together over the course of the winter, Im building it up with mostly High quality parts that I am getting them threw a local Airsoft Store here in Quebec!

I am still missing a few parts on the list but for the most part the main components I have chosen!

1. Trigger Unit
So I started by choosing a good zero trigger that I knew would be durable while effective in the field, I thought of the laylax zero trigger box at first but then decided to go with a PDI zero trigger box

http://www.evike.com/images/large/Pa..._645111_lg.jpg

2. Cylinder Set
The Cylinder set I knew I had to go with a Vacume Cylinder because of the longer barrel and I also wanted something that would be very durable so I went with the PDI Palsonite Cylinder Set V/C ( Vacume Cylinder)

http://springlock.us/shop/images/apspalsonitecy.jpg

3. Hop-Up
For the Hop up I also decided to go with Pdi as I did for the barrel because the PDI hop up seems to have a better fit with their barrels.

http://shop.ehobbyasia.com/media/cat...E96_1_mark.jpg

4. Barrel
There are many choices for barrels and I decided to go with something quite high end, went with a 495mm long PDI 6.01 TB barrel

http://img715.imageshack.us/img715/3493/agpcs.jpg

Uploaded with ImageShack.us
5.Spacers
Got some barrel spacers to hold the barrel in place!

https://www.airsoft-entrepot.fr/clie...1b8848dba6477e

6. Spring
Had A hard time deciding on what type of velocity I wanted to have and settled with something around ~480FPS, I decided to pickup a Laylax PSS2 150SP Spring

http://www.landwarriorairsoft.com/ac...L96_spring.gif

The rest of the parts im keeping secret so it will be 1 of a kind!
Give me some insight on what you guys think.

Thanks for viewing!