P90 pistons And inner barrels?
 

I've got a Gearbox V6 for a P90 that needs a new Piston? ANY Suggestions?

Also I have been having the problem of bbs hitting the top of my custom silencer foam (shaped for a H&K Pro silencer) and wanted to know other then the Standard MadBull 6.03mm Black Python V2, P90/G36C Barrel, 247mm which I have, if there are any other inner barrels like the one CA one they put with their Proline P90 model for use of the silencer?

save your money and just buy a stock TM one. Alot of gun docs swear by them and the piston is a part that gets used up...

and I would much rather my piston be the soft part and replace that than my gears need replacing.

Looking into them!

Any suggestions on the inner barrel?

I got the systema piston and piston head on mine.... my piston head is aluminum though (ported) its pretty good

Modify high speed white piston is the only one that I found better than the stock Marui one.

As for the barrel, the BBs hitting the inside of your silencer is either because you have WAY too much hop-up, the silencer is not straight or there is a bend in your barrel. I am using a Gemtech G5 silencer on my rifle and even if the inner barrel is about 3" before the silencer, it does not hit.

just remembered on the gfs p90 when we but a m4 length barrel in there we needed to use a spacer. Its prob wobling around like mad. The p90 barrel doesn't exactly have alot holding it still.

Agh alright, good to know. I had to replace the foam inside my Silencer with a custom foam made from pipping foam. I guess I could in theory use a longer Length barrel and squeeze the barrel into the silencer.

I have a 430mm barrel that came with my CA. Buy it off me:)

we used a proper metal spacer. How ever nothing stopping you from using black tape

True. The first time I made a custon foam inner for my silencer it was so tightly compacted it was almost a work out taking the damn thing out (hole was no longer then say a .25g Armist BB)

I wouldn't know where to find metal spacers that would fit my silencer though, plus doesn't that weight down your gun more on the front?

eh wasn't noticeable.

Should I remove the second tooth off the Piston (Modify Polycarbonate Full Teeth) I got?

remove as necessary to improve AOE as required.

Update on my Piston problem can be found here: http://www.airsoftcanada.com/showthr...33#post1292933

Still looking for help with this problem.