TM 3 Burst Shotgun Shell Disassembly
 

Hi,

One of my TM shotgun shells has a loose spring or maybe a broken bb stuck in it. I came home from work yesterday to it would not load properly and only shot 1 bb at a time. Are there any diagrams to show the internals of one of these shells before I take it apart?

You just take the sticker off, pop the pin out and remove some screws, that's all.

There's a great disassemby guide that I have saved on my favorite at home. I used it myself and it worked great. I'll send you the link when I get home later tonight

Thanks
 

Ok sweet thanks. So far the only thing I could find is half of a page in japanese

Doesn't get much clearer than this...


http://www.arniesairsoft.co.uk/revie...echmanual2.jpg


Edit: booo, where'd my link go?

Try this: the image is a screen down and on the right...

Here are the links that I mentioned and that I used to rebuild my M3. I found the first link the most usefull
Good luck
Jakster

http://www.airsoftretreat.com/forums...3939.msg571728

http://www.airsoftcanada.com/showthr...hlight=Benelli

http://infernogmbh.iwarp.com/photo6.html

http://tech.airsoftcanada.com/TM/TM%20-%20M3/

I believe he is having problems with a shell, not the shotgun itself.

Is that one of the brand new ones, heat?

Yes it was one of the new ones. Left it in the shed over the weekend while I was away and a curious 20something year old brother loaded some cheap .20g bbs that may be oversized into the shell. When I loaded it next half of the bbs stay loose and the gun will only shoot one at a time instead of 3

Thanks to everyone else for the info. I'm going to check out you guys' links before I try to take the shell apart