CA G36 Hop up disasembly?
 

Does anyone know of any video, or step by step instructions as to disasembling a CA G36 hopup unit? im converting my E to a C, but dont know how to swap the inner barrel. i cant seem to find any videos on youtube, and have tried searching ASC, but havent had any luck. if anyone can help, i would really appreciate it, thanks.

The SIG uses a similar hop unit, the rotating piece simple pulls off with a small amount of force to reviel the c-clip and then the rest is gravey;)

1. Remove foregrip.

2. Remove 3 screws holding gas tube/outer barrel assembly to body.

3. Slide gas assembly forward out of gun.

4. Grasp hop-up unit firmly, push toward the front of the assembly slightly, and twist 90 degrees (can't remember which way, but it will only turn one way)

5. Slide hop-up and inner barrel out of outer-barrel assembly.

6. Remove black plastic clip holding the barrel in (located infront of hop-up assembly)

7. CAREFULLY slide the barrel out of the hop-up.