Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Canadian (https://airsoftcanada.com/forumdisplay.php?f=100)
-   -   Reference pics (https://airsoftcanada.com/showthread.php?t=68567)

Drake October 6th, 2008 05:17

Reference pics
 
Other sections have decent reference pics, which the Canadian section is lacking, so when I came across these I figured I should throw them up.

Resolution on most is sub-par, unfortunately.


http://tacticalmoose.com/canadian/getty1.jpg
Note C7A2 with RAS front end (thanks to -MikeL-)

http://tacticalmoose.com/canadian/getty2.jpg

http://tacticalmoose.com/canadian/getty3.jpg

http://tacticalmoose.com/canadian/getty4.jpg

http://tacticalmoose.com/canadian/getty5.jpg

http://tacticalmoose.com/canadian/getty6.jpg

http://tacticalmoose.com/canadian/getty7.jpg

http://tacticalmoose.com/canadian/getty8.jpg

http://tacticalmoose.com/canadian/soldier500big.jpg

http://tacticalmoose.com/canadian/KA2006-R106-0127a.jpg

http://tacticalmoose.com/canadian/cdnsoldier_01.jpg

http://tacticalmoose.com/canadian/ar2006g0710015uw8.jpg

http://tacticalmoose.com/canadian/ar2006g0710021pj8.jpg

warbird October 6th, 2008 06:38

Thanks for the pics. We should continue this thread.

R.A.T.M._JLD October 6th, 2008 06:53

This site has some good reference pics of Canadians.

http://www.gun-world.net/usa/m16/diemaco/diemaco.htm

-Skeletor- October 7th, 2008 11:34

In Ref to the C7A2 with the rails; it's a RAS not RIS. Also, lot of guys go and buy their own RAS handguards for their C7 or C8.

Lerch October 7th, 2008 17:19

Aswell there's been a new rail addition to the foregrip with a short 6" rail underneath the heatshield.

Drake October 7th, 2008 19:58

Quote:

Originally Posted by -MikeL- (Post 835136)
In Ref to the C7A2 with the rails; it's a RAS not RIS. Also, lot of guys go and buy their own RAS handguards for their C7 or C8.

Thanks for the insight; didn't think you'd be allowed to modify your weapon that way. Do they actually add the RAS to the issued receiver or just swap out the entire upper?

-Skeletor- October 7th, 2008 20:41

Quote:

Originally Posted by Drake (Post 835557)
Thanks for the insight; didn't think you'd be allowed to modify your weapon that way. Do they actually add the RAS to the issued receiver or just swap out the entire upper?

It's a non-permanment modification. You are just swapping the plastic handguards for the RAS handguards.

You wouldn't be allowed to use your own upper receiver, etc. Handguards, sights, pistol grips, etc are good to go though.

AS92-RD January 26th, 2009 23:35

C8CQB, That's an interesting version of the rifle.

Jimski January 27th, 2009 07:29

www.militaryphotos.net ?

Lerch January 29th, 2009 20:17

Quote:

Originally Posted by AS92-RD (Post 905875)
C8CQB, That's an interesting version of the rifle.

...kay? Did you see one or were you just making a general comment on the C7's? http://airsoftcanada.com/images/smil..._confused2.gif

LoricTheMad January 29th, 2009 20:49

http://www.gun-world.net/usa/m16/diemaco/c8cqb.htm

I think he may be refering to the one on the first website listed. I personally have no idea whether or not it's been labelled correctly though. You may know better.

AS92-RD February 6th, 2009 21:46

Quote:

Originally Posted by LoricTheMad (Post 907960)
http://www.gun-world.net/usa/m16/diemaco/c8cqb.htm

I think he may be refering to the one on the first website listed. I personally have no idea whether or not it's been labelled correctly though. You may know better.

That's what I was referring to. I have never seen a C8 variant quite like that.

Howitzer933 April 8th, 2009 03:22

Second picture, Second man in the relay (with C9 LMG) is Cpl Mark McLaren, a friend of mine and former member of my regiment.

R.I.P Mark

Point_Man April 8th, 2009 09:49

Quote:

Originally Posted by Gozeta (Post 957704)
Second picture, Second man in the relay (with C9 LMG) is Cpl Mark McLaren, a friend of mine and former member of my regiment.

R.I.P Mark

I thought that was "Chinaman". I only knew him briefly. RIP.

warbird April 23rd, 2009 16:31

Could someone ID the gear in this pic please? I believe they're MPs.
http://www.combatcamera.forces.gc.ca...catalog=photos


All times are GMT -4. The time now is 13:58.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.