G&g g2010 max
 

I have been browsing around for a new gun and the G&G G2010 MAX came to my attention. After I got the drool out of my keyboard I seriously started to consider purchasing. Has has anyone bought and gamed this rifle? If so care to give a review?

Thanks for the links, actually I have seen lots of reviews on this gun.
However I really want some stories of gamed experience from a real airsofter, their thoughts and like/dislikes from a battle tested perspective. I have seen enough of retailers shooting at targets and saying how great the gun is.

If you have used a P90 it is like that but like 10 times heavier and bulkier :p

I have a friend who got one when they came out.

The good:
You can change the spring in 5 minutes like some of the Ares guns.
Shoots far and straight, so its good for the field, change the spring for CQB.
It looks good in black.
Its heavy but well balanced.
It short, so its easy to move around obstacle and react quickly.


The bad:
The motor was defective upon delivery.
It only accepts the G&G hicap, but you can modify regular mags to fit.
It doesn't have any other rails then the one on top. Make its hard to install accessories.
The rubber pad on the stock is fragile and easy to lose.
The slot for the sling lets rain water near the gearbox and looks fragile.

My friend loves this gun even if the motor gave him a lot of grief at first. It would shoot, then stop shooting, then start again. Finally found that the contact on the motor was broken. He tells me he would buy this gun again if it was stolen.

I recently went to the states and JG/Echo1/W.e M4 mags and they worked fine, no adjustment needed

I'm not sure about fields most of you guys play on but normally the limit is 425fps so you'd have to change the spring. At the moment I'm not sure how expensive a new spring would be and if it'd be hard to do it yourself but I guess that's what google is for...I wouldn't buy it though...

A spring costs all of $20 tops and the spring guide threads out the rear of the mechbox with a hex key. The gun comes with an M100 spare spring packed in the box. That should drop the FPS down to around 370-380 or so.

Anyone know if they plan to create the tri rail version ?

Pictures on this:

http://www.fnherstal.com/index.php?i...ash=6c6e3e04cb

I would definitely consider getting one !

But it makes the f2000 even more bulkier !

^^ a complete upper receiver with the scope is already available
http://www.wgcshop.com/wgc2008/main/...10&catid=&cat=

My real experience.......

- it not so "functionally superior" as and airsoft , heavy / big, .....it's a fat FAMAS with P90 selector

- Design fault on the anti reverse lever, need 1 drop of Instant glue to fix the issue

- But who ever love F2000 will take these as nothing, like me, yes



Any with a little bit custom work... here you go

p.s. the reason of the "red mark" is a joke @ hong kong where we are forbidden to show the logo @ hong kong, yeah free capital markets

Id prefer the TAVOR to be honest. nice solid gun.

With a terrible, terrible mag release.

Does anyone know why WGC has the G&G G2010 listed as discontinued?

I wouldn't worry about it too much, G&G apparently got the official FN trades so it should be in production for a while.

Also, it's a G&G so the gears will probably be as strong as laminated cardboard.

The gears are machined...next time try not to speculate because your hating, give the guy some useful information not opinions and filler.

Being machined is not a good indication of quality. Machining crap metal gears will not make them strong. My speculation and opinions consist on hands on experience with with several sets of G&G gears which the sector and spur gears strip in low 400ish FPS setup at stock speeds. The gears in their high end guns such as the M14 EBR also strip in normal setups. I can run stock Chinese XYT gears at 400ish FPS @ 30+RPS and they hold up just fine. Their bevel gears are good though, even better than XYTs, I'll give G&G that much. So lemme correct myself:It's a G&G so the Sector and spur gears will probably be as strong as laminated cardboard.

So to paraphrase: Before u give ppl shit for hating your brand, it would be helpful if you gave the OP useful information and not opinions and filler.

Very cheap metal can't be machined.

Edit : well finnaly it can, if it's smooth enought... sorry, my bad !

Is There any news on a EGLM unit for the G2010?

Is G&G really discontinuing this line now? There aren't on the site "Our Products" anymore.

http://guay2.com/web/manual.php?lang=en

I'm not sure what the "max" means, but I have the g2010, and it is honestly my favorite gun. get the gearbox out in a minute, open it up in another. Hopup is good, and holds its setting well, stock performance is very good, and it's a nice gun to hold. I get compliments all the time about how quiet it is, and the stock gears should stand up to everything a "normal" user can put it through.

Two big "flaws" and 1 minor are that since there isn't a bolt going through the gearbox (it's held by friction), if you upgrade the motor, it will shift the gearbox backwards, losing contact between the trigger "rod" and the trigger contacts, causing weird things to happen on auto. I haven't had the second problem, but the cutoff lever can get stuck, because there is a flat edge there, so some people file it to a corner or smooth it out. Apparently if it gets stuck you can hit the side of the gun to free it. The "minor problem" is that it doesn't accept normal mids.So far I've tried G&P (doesn't work without mods), mag vn magazines (needs mod), and green label short pmags (only ones to work without mods for me so far).

It's an easy fix, so I don't think it should be a major determinant for buying the gun. The first problem can be solved by adding a "buffer" behind the gearbox, and I haven't experienced the second.