Is it wrong that my girlfriend makes fun out of me for wanting to build this? Yes I do...very badly. There's an odd sense of attraction, strong tension. So pink... I just wanna BITE DOWN AND bury my face in it.

http://www.intrudershop.com/mmc/imag...K-94(P)-03.jpg
http://www.intrudershop.com/mmc/imag...K-94(P)-07.jpg
http://www.intrudershop.com/mmc/imag...K-94(P)-08.jpg

All those pins do is just align all the holes while you're trying to screw the screws in....

That's what I used them for anyways when I install those triggers.
Saves me the time to go through my tool box to find a small enough pin to do the same thing. lol.

Pink sshhhmink.

You need to build one of these:
http://media.urbandictionary.com/ima...lock-43669.jpg


:O:O:O:O:O

"Gold Coated"

:/

Ew, do they really state that? lol

At least it's not made from brass.

So....my guarder hammer spring snapped...anyone help me out with any ideas? Thanks

Also, does anyone have any news on the GunsModify Sai set? I heard it's going to be compatible for both 17 and 18c, how's that going to work?



http://i143.photobucket.com/albums/r...3.jpg~original

SD 150% hammer spring is what u want

I'll definitely look into it, guarder one honestly sucks but is the only one I can find here. Any local resources for that part you know of? Or overseas only? Please pm me, thanks man :)

Guarder ones loses their tension over time. No retailer that I know has it locally. Has to be from overseas.

Thank You e-luder
 

Just joined the forum after a "Glock Upgrades" search and F**k ME, what a great post. Spending my working day reading this and learnt loads so far. Have just started using Glocks and this is the most comprehensive help I've found so far.

Good job e-luder and co.

Hi everyone, ever since the SAI slides were announced I wanted to buy one and now I am seriously considering pre-ordering one. I would rather want the regular non-RMR one.

I kinda have this on my wishlist atm, could you tell me if I am going the right way? I want to use this for CQB skirms and for some IPSC from time to time.

TM Glock 17
Gunsmodify SAI slide
Gunsmodify blowback unit
Nineball hop rubber
PDI 6.01 precision barrel or Nine Ball 6.03
Nine Ball mag seal rubbers
Guarder steel night sights
Shooters Design 150% hammer spring
Guarder magazine catch

Also, is there a difference between the regular and custom mags besides the extended look?

Wow it's been a long time. Hello e_luder and turok_t!

So I think it's finally time to rebuild my 18C. It's been sitting ever since I sold my PGC slide. I'm going to rebuild it since I see all this new information on the thread.

Current build:
Guarder Lower
Guarder 150% Hammer Spring
Guarder Recoil spring and guide rod
KM Steel Hammer
Guarder Steel Magazine Catch
Guns modify Extended slide stop
Action Loading nozzle (have stock too)
Stock Piston Lid (Have Guarder Enhanced one too)

After ready back 10 pages or so it seems I should swap some of these parts for:
Airsoft Surgeon Hard Nozzle and piston head
Nine Ball Gas Route
Firefly Plastic Rocket Valve
Shooters Design 150% Recoil spring
Shooters Design 150% Hammer spring

Is there anything else I should change? Should I still get new gas routes if I only use WE mags? Are PDI slides and outer barrels still okay to use?

Airsoft Surgeon doesn't make enhanced loading muzzles for the Glock 18c. Only for the Glock 17.

I don't think you really need to go into an extensive build like this. You want to keep the gun in stock form as much as possible. You want to avoid taking it down and ruining the tolerances with different aftermarket parts.

All really need is an enhanced hammer spring, enhanced loading muzzle (although the stock one is really one of the best options you have for the 18c) and the Guarder frame with a modified screw casing.

Give or take a good piston head but that's all you really need.

Thread lock your rear sight screw because it will come loose. lol.

Gas route packings only need to be changed if the magazine you're using is not working right with your system. It's a situational kinda upgrade because each magazine will interact differently with the gun.

also...

PDI makes Glock slides and outer barrels now???
I know G&P recently joined the fray but had no idea PDI was joining in...

Link please?

Not PDI, my apologies. I meant PGC.

Do you think I should swap my guarder springs for shooters design ones? I'm definitely gonna get the rocket valve but is the plastic one as good as the metal one? I don't even know where the valve would go lol, I've never even seen that part in my gun.