Took the time to go through all my MARSOC pics for any DM rifles, and that's what I got...

I believe it's
Mk 11 Mod 0: #1, 3, 4, 6, 7
Mk 11 Mod 2: #5, 8
M14: #2
Or I am wrong?

And Drake posted an M39 earlier which I had too.

@Drake, yes it's for DM role. I'm finishing to gather my basic MARSOC operative gear, then probably over the winter I'll work on the DM kit.

#8 is a Mod 1 (no ambi controls, no adjustable stock)

#5 is interesting... it has a FH so it's definitely an M110 upper, Magpul PRS stock (non-standard mod), lower doesn't look ambi... looks like someone got a Mod 1 and felt ripped off and installed his own adjustable stock.


Just noticed #4 is unusual, too: it's got a RAS collar, so its not a Mk1, it's also got the PRS stock and its not using the usual SR25/Mk11 suppressor (low res image, hard to tell, but it kinda looks like the KAC QD suppressor). It's also not using the usual SR25 optics, instead sporting what looks like a one piece scope mount (KAC?) and an offset/canted Docter Sight.

Done

http://i288.photobucket.com/albums/l.../LBV88mod2.jpg

Old school really? :D

http://i288.photobucket.com/albums/l...rsoft/6pe2.jpg

Any of you guys know what shotgun MARSOC use? I know there is the M870 and M500 but which version?

Is it the folding stock? Like this one:
http://www.arniesairsoft.co.uk/revie...tom/m870_1.jpg
(Taken of Arnies)

http://i424.photobucket.com/albums/p...IP/Gear037.jpg

I don't have all my kit yet as you can see. But the big chunks are there!

Thanks!
I'd rather not calculate how much all this cost lol.


My whole FR/MARSOC Kit list
(items not in picture is in green)

1st line:
Flyye Right angle belt X1
Pantac Right angle drop leg X1
-Pantac single .45 mag pouch X4
-Pantac double M4 mag pouch X1
Pantac Dump pouch
Pantac drop leg adapter
Safariland 6004 for M1911


2nd line:
Pantac land CIRAS X1
Pantac Admin pouch X1
Pantac double M4 mag pouch X1
Pantac single m4 mag pouch X2
Pantac CIRAS type 2 single point sling X1
Pantac triple single X2
Pantac accessories pouch X1
Pantac medic pouch X1
Pantac smoke grenade pouch X1
Pantac radio pouch X1
Pantac 1Qt canteen pouch X1
Pantac MBSS (MAP) hydration pack X1
Source USMC issued 3L hydra pack X1
Comms (radio/PTT)

I have training SAPI plates in my CIRAS, those blue plates
and fake BALCS soft armor.

Uniforms:
Issued Desert MARPAT
Issued WD MARPAT
Issued flyer gloves.


Footwear:
BATES USMC Gore-tex boots

Head gear:
MSA MICH TC 2000 custom paint
Clone NOROTOS 3 hole mount
NOROTOS NVG arm
ESS Profile goggle
ESS Ice 2.4
Peltor Comtac II

I am sure I am forgetting somethings but that's the big part of it.

Awesome. I'll still stick with my LWH though...:D
I'm working on my own high speed Marine grunt kit (SPC based). My well-thought out kit-list (I guess):
* (Have already)**(Repro)
-LWH Gen.2 (Pads, not sweatband)*
-Reversible MARPAT Helmet Cover
-CB Cat Eyes band*
-PASGT NVG Plate and Rhino Swing Arm** mount
-Surefire HL-1 Helmet Light Gen.2**
-FROG Desert MARPAT Uniform**
-Corcoran USMC Stamped Olive Mojave Boots (I know a place to get them for $79.99)
-Pantac SPC (2nd Version, better CB shade, has velcro in upper section and better cummerbund)
-Pantac CB Groin Protector
-Mix of Pantac/Flyye CB Pouches for ammo/utilities.
-Pantac CB duty belt w/leg panel for pouches not on SPC
-BHI CT Hydration Carrier
-Alta MOUT Kneepads

And the blasters :
STAR M4 RIS
-ACOG TA31 RCO**
-Surefire M961**
-STAR Foregrip
-EBB PEQ-15
-EBB ACOG Killflash
-Dboy's Rear Sling Mount
-Pantac 1 Point Sling
-6 MAG Mid-Caps
-2 FDE MagPul 75 rnd. Pmags

Double Eagle M56DL (M1014)
-Milspex black 3 point sling
-8 Spare shells
And all the necessary items for airsofting... (batteries, water, BB's, speed loaders)

Hey, how'd you make that signature? I've been trying forever and never found out...

Got these pics on another airsoft forum... these are airsofters (well, "impressionnists", whatever).

This is exactly what I'm going for my greenside loadout, although I'll use my issued ILBE Assault Pack instead (I'd love the ILBE Recon pack, but way too expensive on the market right now).

However, as good as it looks, and plausible (most if it is apart of the FSBEII kit, or has been seen on MARSOC guys in other contexts), there's still no refpics of a similar setup yet... so comments or tips before I proceed are always welcome!

Does MARSOC/FR use Sordin headsets?

Another question, would a Sordin/ComTac II headset fit under an LWH?

I'm planning a FR/MARSOC kit... this is what I had in mind... (Some of this was inspired by Yannos, thanks!)

Headgear:
Replica MICH 2000, spray painted CB
Replica Norotos 3 Hole
3 2x3 Velcro attachments, top of helmet, and both sides
Tan Goggle Retention straps (Bunny ears are the nickname, I presume?)
ESS NVG Profiles
Oakley M-Frames

1st Line:
Pantac Low-Pitched Waist Pack
Pantac War belt
Flyye Right Angle leg panel
Flyye 2x Double .45 pistol mag pouch
Flyye Dump pouch
Safariland 6004 for 1911 (Where do I pick up that MOLLE adapter?)

2nd Line:
Pantac Land CIRAS
4x M4 mag pouches (3 Pantac, 1 Flyye)
Pantac Medic pouch (Used as a GP)
Flyye IFAK Pouch
Pantac Accessories pouch
Pantac Right angle admin pouch (Resembles Eagle's MLCS admin)
Pantac MBITR pouch
Pantac Smoke Grenade pouch (Used for a trainer smoke grenade I'm getting off a friend... for free! :D)
Pantac MAP

Comms/Assorted Gear
Hatch SOG Operator Gloves
Woodland/Desert MARPAT Uniform
Corcoran USMC Olive Mojave Boots
Peltor ComTac's
Motorola Talkabout inside a replica MBITR shell

Weapons:
KWA M4 RIS, custom painted tan crane stock w/ 'tacticool' earplugs :), tan EOTech 553, Element M961 combat light, KAC foregrip

WE M1911 MEU, Gemtech Retention Lanyard

http://i288.photobucket.com/albums/l...t/DSC_1050.jpg

Going to be modified again soon when I receive my next batch of FSBE stuff

Here's my own greenside kit I'm setting up for an upcoming operation.
Any comments? (besides that it isn't easy to see on this picture... I'll take some more with natural lightning tomorrow).

There's still some EBB pouches (easy to spot with its color) which I'm transitionning to Flyye/Pantac (or issue when I get a deal). The order has been made this morning, so within a month that should be good.

http://img259.imageshack.us/img259/329/img1109.jpg

From left to right, on the RRV:
Medic
Single mag
MBITR (I hope to get a TCI MAST to wire the antenna on my back)
Single frag x2
Double mag
Canteen
C-A-T (top)
Admin (top)
TCI PTT (top)

On the ILBE assault pack:
Double mag
Smoke
Smoke
Flexcuffs
IFAK

and a fanny pack.

I also got the SU233 for my SOPMOD, but I removed it for now as I don't really need it for greenside ops. I also have a grippod on the way as the TD Battlegrip will go on my Block2 upper. I have the KAC rail covers, but I forgot to put them on for the pictures. I'll take more after the OP with some more natural wear anyway.

Technically Marine Recon are not issued ILBE system. It's a grunt thing. If you're going for MFR you should get EI Patrol Pack (Pantac has a version of it)

I'd also take off the PEQ15 as I've seen that maybe once in all the pics I've came across. Specter is the flavor of the year but ACOG would be good as well.

As for the rig itself, not too bad but I'd question the pouches layout... Are you a lefty? If not I'd move the MBITR to the left side. I know it's all AS but with a real MBTIR you'd have that whip antenna hampering a proper cheek wield of your gun. The centered frags strike me as odd as well, I'd personnaly move them to the side and consolidate the mags together.

But that's just me ;)


I hope I don't sound too harsh or anything but I know you're looking at a "legit" looking kit