Yes it's a KJW, started off as a tinted lower G32C.
The SD steel valve knocker was a straight replacement with no issues.
I had a Guns Modify bbu installed briefly which seemed to work fine, but I ended up putting it in my G17 project instead.
I'm slowly swapping out the internals, but at this time I can't say definitively what parts work well or not.
Next planned upgrades are Guarder steel sear and hammer.
....and yeah, I splurged on a Detonator slide/barrel, really nice quality set.

Here's my glock 19 build. KJ g23 base with:

-Guarder Aluminum slide
-Guarder steel barrel
-Guarder g17 steel sights
-Guarder 150% recoil spring and guide
-GunsModify Salient Arms trigger (needed alot of mods)
- Gunsmodify g17 lightweight blowback unit
- Nineball piston head

The guns shoots a lot faster and snappier now. Gas efficiency is also really good. I haven't messed with the hop yet, only teflon taped the rubber to the inner barrel. It shoots 290FPS instead of 250FPS now.
Still need to install the Guarder frame. Unfortunately the guarder frame was designed to use the Glock 17 pin and not the smaller g26 style pin. So for the time being, i messed around with the kj frame.

http://i1082.photobucket.com/albums/...ps6864aa27.jpg
http://i1082.photobucket.com/albums/...psceddefdc.jpg
http://i1082.photobucket.com/albums/...ps2bcf83f9.jpg

Nice to see another KJ G19:), looking great!

Was your Guarder frame missing the larger trigger pin? (There was one included with my frame)

Yea it was. It didn't come with it. Where did you get yours from? I got mine from Qlong.

I did make'd a thing. I think it's a nice thing.
https://fbcdn-sphotos-a-a.akamaihd.n...56887511_o.jpg

I like that! Looks futuristic

https://i.imgur.com/LnKiP9y.jpg
https://i.imgur.com/3JT3UsZ.jpg
https://i.imgur.com/2YMcvLY.jpg
https://i.imgur.com/CEahcpR.jpg

http://i.imgur.com/aivT3YA.jpg
http://i.imgur.com/UB6gLkh.jpg

Just a simple, functional build based on a Tokyo Marui Gen3 Glock 17

Parts:
GunsModify CNC Slide and Barrel Set ( 2014 Version )
GunsModify CNC Aluminum Adjustable Trigger (SAI Version)
GunsModify Extended Slide Stop
GunsModify Serial Tag
GunsModify Enhanced Hammer Spring
Guarder Steel Night Sights
Guarder Frame
Guarder Beaver Tail Grip
Guarder Enhanced Loading Nozzle
Guarder 150% Recoil Spring
Firefly 6.03mm Inner Barrel
NINE BALL Hop-Up Bucking

Found a doctor sight mount in my parts bin, so naturally...

https://fbcdn-sphotos-b-a.akamaihd.n...ab0e5e44d68050

Beautiful. Nice and simple, but not too simple lol

I'd love a glock

KJ Works (Guarder) G23

http://imageshack.com/a/img538/1681/zDHMI7.jpg
http://imageshack.com/a/img540/4882/dMucpo.jpg
http://imageshack.com/a/img674/2012/cz8DRZ.jpg
http://imageshack.com/a/img901/2787/BuzkVt.jpg
http://imageshack.com/a/img673/6083/i4mZwc.jpg

-KJ Works G23
-Guarder Aluminum CNC G23 FBI Slide
-Guarder Original Frame (Euro version)
-Guarder Stainless Serial No. Tag
-Guarder Recoil Spring (150%)
-Guarder Steel Recoil Spring Guide
-Guarder Steel Outer Barrel (Type C, FBI)
-Guarder Extended Slide Stop
-Guarder Extended Mag Release
-Guarder Glock GBB Magazine Base
-Guarder Beaver Tail Grip-
-Guarder Steel Night Sight
-GunsModify Aluminum SAI Ver3 Trigger
-Night Evolution APL TACTICAL PISTOL LIGHT

Really like the look of the OD slide with the tan frame, nice build! :)

Thanks mate :) The slide is actually tan, looks a little like burnt bronze.

Glock 17 SAI TIER 2 (TM / Prime slide set / AS frame / GM trigger & slide stop / Ready Fighter magwell & beavertail)

http://img4.hostingpics.net/pics/206357SAIRMRTIER2.jpg

http://img4.hostingpics.net/pics/157842SAIRMRTIER22.jpg

Frost

Stark Arms G19 vs. KJW G23
http://imagizer.imageshack.us/v2/102...673/SgpYDk.jpg